Improving Accuracy of the Measurement System for Railway Tanks

MA Kewen; ZHAO Jing

doi:10.12338/j.issn.2096-9015.2020.0004

Volume 65 Issue 12

Dec. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(12): 15-16, 54

MA Kewen, ZHAO Jing. Improving Accuracy of the Measurement System for Railway Tanks[J]. Metrology Science and Technology, 2021, 65(12): 15-16, 54. doi: 10.12338/j.issn.2096-9015.2020.0004

Citation:

MA Kewen, ZHAO Jing. Improving Accuracy of the Measurement System for Railway Tanks[J]. Metrology Science and Technology, 2021, 65(12): 15-16, 54. doi: 10.12338/j.issn.2096-9015.2020.0004

MA Kewen, ZHAO Jing. Improving Accuracy of the Measurement System for Railway Tanks[J]. Metrology Science and Technology, 2021, 65(12): 15-16, 54. doi: 10.12338/j.issn.2096-9015.2020.0004

Citation:

MA Kewen, ZHAO Jing. Improving Accuracy of the Measurement System for Railway Tanks[J]. Metrology Science and Technology, 2021, 65(12): 15-16, 54. doi: 10.12338/j.issn.2096-9015.2020.0004

PDF( 406 KB)

Improving Accuracy of the Measurement System for Railway Tanks

doi: 10.12338/j.issn.2096-9015.2020.0004

MA Kewen,
ZHAO Jing^,

Ningxia Coal to Liquid Chemical Quality Inspection and Measurement Center of National Energy Group, Lingwu 750411, China

Available Online: 2021-11-01
Publish Date: 2021-12-01

Abstract

Abstract

To improve the accuracy of the train filling and measuring system is important for maximizing the utility of system, including avoiding over-loading and under-loading, and reducing delay of the filling work, measuring by ruler, and sales and freight transportation. Through an on-site investigation of a loading mass flowmeter and the loading process, the main factors causing errors were analyzed, and practical and effective solutions were put forward. The efficiency of the train tank loading was obviously improved and the manual labor for gauging was greatly reduced.
- metering system,
- accuracy,
- data comparison,
- measurement accuracy,
- trade settlement

FullText(HTML)

References(12)

References

[1]	李景玉. 定量装车计算机控制系统的实现[J]. 石油化工自动化, 2001(2): 73-74. doi: 10.3969/j.issn.1007-7324.2001.02.024
[2]	王丹丹. 成品油出厂与批量控制[J]. 石油化工自动化, 2001(4): 32-33. doi: 10.3969/j.issn.1007-7324.2001.04.010
[3]	李英华, 何力. 罐内液体石油产品计量技术规范: JJF1014-1989. 北京: 中国标准出版社, 1989.
[4]	武胜林. 质量流量计超差原因分析[J]. 石油化工自动化, 1999(4): 66-69.
[5]	肖素琴. 油品计量员读本[M]. 第3版. 北京: 中国石化出版社, 2016: 231-239.
[6]	连琴, 丁遵义. 油品铁路罐车计量中的误差分析[J]. 中国高新技术企业, 2008(13): 100-101. doi: 10.3969/j.issn.1009-2374.2008.13.081
[7]	陈陆平. 如何减少油品计量中的误差[J]. 中国计量, 1999(8): 45-46. doi: 10.3969/j.issn.1006-9364.1999.08.040
[8]	纪纲. 流量测量仪表应用技巧[M]. 第2版. 北京: 化学工业出版社, 2014: 141-151.
[9]	金德玺. 石油和液体石油产品温度测量法(手工法): GB/T8927—2008[S]. 北京: 中国标准出版社, 2008.
[10]	管焕铮, 薄艳红. 原油和液体石油产品密度实验室测定法(密度计法): GB/T1884-2000[S]. 北京: 中国标准出版社, 2000.
[11]	金德玺. 石油和液体石油产品液位测量法(手工法): GB/T 13894—1992[S]. 北京: 中国标准出版社, 1992.
[12]	魏进祥, 刘峰阳. 石油液体手工取样法: GB/T 4756-2015[S]. 北京: 中国标准出版社, 2015.