Verification of Encoder Coefficients by the Static Volumetric Method with a Gas Calibration Facility

ZHANG Ruida; LIANG Yangpeng; LI Ruiqi

doi:10.12338/j.issn.2096-9015.2020.0292

Volume 66 Issue 1

Jan. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(1): 53-56

ZHANG Ruida, LIANG Yangpeng, LI Ruiqi. Verification of Encoder Coefficients by the Static Volumetric Method with a Gas Calibration Facility[J]. Metrology Science and Technology, 2022, 66(1): 53-56. doi: 10.12338/j.issn.2096-9015.2020.0292

Citation:

ZHANG Ruida, LIANG Yangpeng, LI Ruiqi. Verification of Encoder Coefficients by the Static Volumetric Method with a Gas Calibration Facility[J]. Metrology Science and Technology, 2022, 66(1): 53-56. doi: 10.12338/j.issn.2096-9015.2020.0292

Citation:

PDF( 603 KB)

Verification of Encoder Coefficients by the Static Volumetric Method with a Gas Calibration Facility

doi: 10.12338/j.issn.2096-9015.2020.0292

4113 Measurement Center of Science, Technology and National Defense Industry, Xinxiang 453049, China

Available Online: 2021-12-14
Publish Date: 2022-01-24

Abstract

Abstract

Based on the 20L bell jar gas flow standard device in our station, this paper briefly introduces its technical parameters, basic structure and working process. The static volumetric method was used to verify its performance. The verification process is introduced in detail and the verification requirements with the static volumetric method are explained in detail through examples.
- metrology,
- gas calibration facility,
- static volumetric method,
- encoder

FullText(HTML)

References(12)

References

[1]	徐英华. 浅谈气体流量标准装置的发展状况[J]. 现代测量与实验室管理, 2004(2): 7-8. doi: 10.3969/j.issn.1673-8764.2004.02.002
[2]	苏彦勋, 梁国伟, 盛健. 流量计量与测试[M]. 第2版. 北京: 中国计量出版社, 2007.
[3]	王自和, 范砧. 气体流量标准装置(修订版)[M]. 北京: 中国计量出版社, 2005.
[4]	仝卫国, 李国光, 苏杰, 等. 计量测试技术[M]. 北京: 中国计量出版社, 2006.
[5]	周文辉, 师恩洁, 刘丹, 等. 静态容积法检定钟罩式气体流量标准装置时存在的问题[J]. 中国计量, 2012(4): 111-112. doi: 10.3969/j.issn.1006-9364.2012.04.089
[6]	曹久莹. 钟罩式气体流量标准装置检定中的思考[J]. 仪器仪表标准化与计量, 2010(2): 35-37. doi: 10.3969/j.issn.1672-5611.2010.02.011
[7]	王俊涛, 信彦峰, 贾正红, 等. 尺寸测量法在20000升钟罩式气体流量标准装置检定中的实际运用[J]. 计量与测试技术, 2015(3): 61-62.
[8]	全国流量容量计量技术委员会. 钟罩式气体流量标准装置: JJG 165-2005[S]. 北京: 北京中国计量出版社, 2005.
[9]	孙树红, 赵长海, 万秋华, 等. 小型光电编码器自动检测系统[J]. 中国光学, 2013, 6(4): 600-606.
[10]	耿存杰, 张东飞, 李长武. 采用静态容积法实现高精度气体容积式流量计量值溯源方法的探讨[J]. 工业计量, 2017, 27(2): 65-67.
[11]	刘明, 张璋, 马云峰. 静态容积法检定钟罩中温湿度及压力影响的研究[J]. 中国计量, 2017(9): 125-127.
[12]	刘伟. 钟罩式气体流量标准装置的不确定度评定[J]. 计测技术, 2002(5): 35-37. doi: 10.3969/j.issn.1674-5795.2002.05.010