Citation: | WANG Fan, HUANG Yao, YANG Yu, XUE Zi. Angular Velocity Deviation Calibration in Single Circumference Range[J]. Metrology Science and Technology, 2021, 65(8): 24-28. doi: 10.12338/j.issn.2096-9015.2020.9009 |
[1] |
国防科学技术工业委员会. 惯性技术测试设备主要性能测试方法: GJB1801-93[S]. 北京, 1993.
|
[2] |
国家质量监督监督检验检疫总局. 低速转台校准规范: JJF1210-2008[S]. 北京, 2008.
|
[3] |
黄垚, 薛梓, 乔丹. 光学陀螺测角仪计量性能测试[J]. 计量学报, 2017, 38(S1): 64-67.
|
[4] |
李星善, 马珣, 袁慧铮, 等. 光纤陀螺角速率延迟特性分析与测试[J]. 导航定位与授时, 2016, 3(1): 69-72. doi: 10.3969/j.issn.2095-8110.2016.01.013
|
[5] |
Dan Qiao, Zi Xue, Yao Huang. Study on the calibration method of metrological performance of ring laser gyroscope[P]. Other Conferences, 2016, 10155.
|
[6] |
谷玉海, 刘玉龙, 徐小力. 陀螺仪动态角度测量系统的设计[J]. 仪表技术与传感器, 2018(4): 122-126. doi: 10.3969/j.issn.1002-1841.2018.04.028
|
[7] |
Fan Wang, Zi Xue, Yao Huang. The calibration of angular velocity deviation among full rotary circle[P]. International Symposium on Precision Mechanical Measurements, 2019, 11343.
|
[8] |
Yao H, Zi X, Dan Q. The NIM continuous full circle angle standard[J]. Measurement Science and Technology, 2018(29): 74013.
|
[9] |
乔丹, 薛梓, 黄垚, 等. 分多读数头位置偏差对测角误差的影响研究[J]. 计量学报, 2017, 38(6): 676-680. doi: 10.3969/j.issn.1000-1158.2017.06.04
|
[10] |
WATANABE, Tsukasa. Self-Calibratable Rotary Encoder[J]. Journal of the Japan Society for Precision Engineering, 2016, 82(9): 792-796. doi: 10.2493/jjspe.82.792
|
[11] |
Huang Y, Xue Z, Wen X ,et al. Comparison between angle interferometer and angle encoder during calibration of autocollimator[J]. SPIE, 2015, 944601: 944624.
|
[12] |
Kokuyama W, Watanabe T, Nozato H, et al. Angular velocity calibration system with a self-calibratable rotary encoder[J]. Measurement, 2016, 82: 246-253. doi: 10.1016/j.measurement.2016.01.011
|