Volume 66 Issue 1
Jan.  2022
Turn off MathJax
Article Contents
HUANG Lei, DOU Yanhong, FAN Yu, HE Zhichao, ZHANG Shuang, ZHANG Liqiu, ZHANG Bo. Development of a Robot Position and Attitude Measuring System Based on a Laser Tracker and an Articulated Arm Coordinate Machine[J]. Metrology Science and Technology, 2022, 66(1): 26-31. doi: 10.12338/j.issn.2096-9015.2021.0005
Citation: HUANG Lei, DOU Yanhong, FAN Yu, HE Zhichao, ZHANG Shuang, ZHANG Liqiu, ZHANG Bo. Development of a Robot Position and Attitude Measuring System Based on a Laser Tracker and an Articulated Arm Coordinate Machine[J]. Metrology Science and Technology, 2022, 66(1): 26-31. doi: 10.12338/j.issn.2096-9015.2021.0005

Development of a Robot Position and Attitude Measuring System Based on a Laser Tracker and an Articulated Arm Coordinate Machine

doi: 10.12338/j.issn.2096-9015.2021.0005
  • Available Online: 2021-12-10
  • Publish Date: 2022-01-24
  • Due to the limitation of the laser tracking technique in robot position and attitude detection, once the light is blocked, it cannot be detected. A laser tracking joint arm measurement system adopts the combination of a laser tracker and an articulated arm coordinate machine, and uses the principle of laser beam tracking and the high rigidity and flexibility probe of joint arm. It can detect and calibrate the robot's position and attitude. A laser interferometer and a length measuring machine were used to evaluate the system in different attitudes. The experiment results showed that the maximum error of the system was −0.042 mm at 2000 mm. The error at each point did not exceed ±(30+0.8×10−5L)μm.
  • loading
  • [1]
    任瑜, 张丰, 郭志敏, 等. 利用Leica激光跟踪仪对工业机器人现场标定的方法[J]. 计量技术, 2019, 543(11): 64-68.
    [2]
    任国营, 王为农, 苏永昌, 等. 激光跟踪仪动态参数自动测试系统设计[J]. 计量学报, 2008, 29(2): 114-116.
    [3]
    温秀兰, 崔俊宇, 芮平, 等. 激光跟踪仪现场校准设备相关问题探讨[J]. 计量技术, 2017, 523(1): 36-38.
    [4]
    董琳. 6R型工业机器人精度分析与结构参数标定的研究[D]. 哈尔滨: 哈尔滨工业大学, 2017.
    [5]
    童洋洋. 6R型工业机器人标定技术研究及算法实现[D]. 合肥: 合肥工业大学, 2017.
    [6]
    任永杰, 邾继贵, 杨学友, 等. 利用激光跟踪仪对机器人进行标定的方法[J]. 机械工程学报, 2007, 43(9): 195-200. doi: 10.3321/j.issn:0577-6686.2007.09.038
    [7]
    任永杰. 测量机器人本体标定技术要求[D]. 天津: 天津大学, 2007.
    [8]
    李定坤, 叶声华, 任永杰, 等. 机器人定位精度标定技术的研究[J]. 计量学报, 2007, 28(3): 224-227.
    [9]
    赵学峰. 机器人动态追踪系统的标定技术研究[D]. 马鞍山: 安徽工业大学, 2019.
    [10]
    赵海鹏, 杜玉红, 丁娟, 等. 移动机器人中激光雷达测距测角标定方法[J]. 红外与激光工程, 2019, 11(6): 371-378.
    [11]
    张晓平. 六轴自由度关节型机器人参数标定方法与实验研究[D]. 武汉: 华中科技大学, 2013.
    [12]
    魏霖. 多关节坐标测量机的坐标转换和参数标定[J]光电工程, 2007, 34(5): 57-61.
    [13]
    于连栋, 程文涛, 费业泰. 基于激光跟踪仪的关节式坐标测量机参数标定[J]. 中国科学技术大学学报, 2009, 39(12): 1329-1332.
    [14]
    温瑞. 六自由度测量机器人误差分析与仿真[D]. 西安: 西安理工大学, 2008.
    [15]
    谷乐丰, 杨桂林, 方灶军, 等. 一种新型机器人自标定装置及其算法[J]. 机器人, 2020, 42(1): 1-3.
    [16]
    李瑞峰, 候琪琳, 陶谦. 机器人末端工具参数自动标定方法[J]. 哈尔滨工业大学学报, 1998, 30(2): 74-76.
    [17]
    国家质量监督检验检疫总局. 工业机器人性能规范及其试验方法: GB/T 12642-2013[S]. 北京, 2014.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(7)  / Tables(1)

    Article Metrics

    Article views (462) PDF downloads(67) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return