LabVIEW-Based Calibration Device for Impact Dynamic Force Sensors

YAN Rui; LUO Xin; ZHAO Qiang; WANG Yiwei; HU Bolun

doi:10.12338/j.issn.2096-9015.2021.0019

Volume 65 Issue 10

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(10): 54-57, 62

YAN Rui, LUO Xin, ZHAO Qiang, WANG Yiwei, HU Bolun. LabVIEW-Based Calibration Device for Impact Dynamic Force Sensors[J]. Metrology Science and Technology, 2021, 65(10): 54-57, 62. doi: 10.12338/j.issn.2096-9015.2021.0019

Citation:

YAN Rui, LUO Xin, ZHAO Qiang, WANG Yiwei, HU Bolun. LabVIEW-Based Calibration Device for Impact Dynamic Force Sensors[J]. Metrology Science and Technology, 2021, 65(10): 54-57, 62. doi: 10.12338/j.issn.2096-9015.2021.0019

Citation:

PDF( 746 KB)

LabVIEW-Based Calibration Device for Impact Dynamic Force Sensors

doi: 10.12338/j.issn.2096-9015.2021.0019

1.
Beijing Institute of Metrology, Beijing 100026, China
2.
Beijing University Of Technology, Beijing 100124, China

Available Online: 2021-05-27
Publish Date: 2021-10-18

Abstract

Abstract

Dynamic force sensors measure force dynamically, which plays an important role in industrial manufacture. It is important to calibrate the sensors as their accuracy directly affect the production. In this paper, the calibration principle for impact dynamic force sensors is studied. An existing impact acceleration standard device was modified to calibrate dynamic force sensors. A design scheme based on LabVIEW for the software and hardware of the calibration device for impact dynamic force sensors is proposed, with which a highly integrated and automatic calibration device was developed. Test results showed that the maximum deviation from the reference dynamic sensitivity was 0.81%, which met the design requirements.
- dynamic force,
- impact method,
- calibration device,
- LabVIEW,
- automatic

FullText(HTML)

References(15)

References

[1]	赵静. 动态力传感器校准实例——动态信号的采集与分析[J]. 计测技术, 2015, 35(S1): 99-101.
[2]	曹亦庆, 李善明, 孟峰, 等. 动态力传感器校准方法冲击力法校准: GB/T 37776-2019[S]. 北京: 中国标准出版社, 2019.
[3]	闫瑞, 骆昕, 刘嘉靖, 等. 基于LabVIEW的动弹仪校准装置[J]. 计量技术, 2019(1): 41-43.
[4]	东方, 焦洋, 安少华, 等. 基于电液伺服技术的动态力校准装置的研制[J]. 计测技术, 2016, 36(S1): 175-176.
[5]	卢小犇, 李政, 李何良, 等. 力传感器绝对法脉冲力校准的研究与试验[J]. 自动化技术与应用, 2020, 39(8): 14-19. doi: 10.3969/j.issn.1003-7241.2020.08.004
[6]	蔡永洪, 孙晓辉. 基于伺服驱动的离心式动态力校准装置[J]. 计量学报, 2019, 40(5): 875-879. doi: 10.3969/j.issn.1000-1158.2019.05.22
[7]	倪博, 罗晓平, 武博. 动态力传感器动态校准中校准方式及负载质量选取的研究[J]. 计测技术, 2016, 36(S1): 118-121.
[8]	何旋. 动态力校准中锤体质量块的结构设计[J]. 科技创新导报, 2016, 13(4): 57-59.
[9]	骆昕, 闫瑞, 韩超, 等. 材料试验机受力同轴度测量仪的研制[J]. 计量技术, 2019(10): 9-12.
[10]	黄晓园. 基于LabVIEW的THz-TDS采集分析系统的设计与实现[D]. 电子科技大学, 2018.
[11]	东方, 焦洋, 安少华, 等. 动态力数据采集及处理系统研究[J]. 计量与测试技术, 2016, 43(9): 21-22.
[12]	刘玫玲, 骆昕, 陈洪芳, 等. 疲劳试验机动态校准装置的研制与实验研究[J]. 机电工程, 2018, 35(12): 1338-1341. doi: 10.3969/j.issn.1001-4551.2018.12.016
[13]	陈树学, 刘萱. LabVIEW宝典[M]. 北京: 电子工业出版社, 2011.
[14]	杨高科. LabVIEW虚拟仪器项目开发与管理[M]. 北京: 机械工业出版社, 2012.
[15]	张力, 王宇, 秦海峰, 等. 正弦法力传感器动态特性校准规范: JJF1370-2012[S]. 北京: 中国质检出版社, 2012.