Study on Techniques of Extraction and Testing of Residual Solvent in Carbon Fibers

ZHAO Deming; ZHANG Shun; CONG Jiayue; WANG Dan; WANG Lu; LI Changqing

doi:10.12338/j.issn.2096-9015.2021.0101

Volume 65 Issue 12

Dec. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(12): 45-48, 11

ZHAO Deming, ZHANG Shun, CONG Jiayue, WANG Dan, WANG Lu, LI Changqing. Study on Techniques of Extraction and Testing of Residual Solvent in Carbon Fibers[J]. Metrology Science and Technology, 2021, 65(12): 45-48, 11. doi: 10.12338/j.issn.2096-9015.2021.0101

Citation:

ZHAO Deming, ZHANG Shun, CONG Jiayue, WANG Dan, WANG Lu, LI Changqing. Study on Techniques of Extraction and Testing of Residual Solvent in Carbon Fibers[J]. Metrology Science and Technology, 2021, 65(12): 45-48, 11. doi: 10.12338/j.issn.2096-9015.2021.0101

Citation:

PDF( 782 KB)

Study on Techniques of Extraction and Testing of Residual Solvent in Carbon Fibers

doi: 10.12338/j.issn.2096-9015.2021.0101

1.
Weihai Academy of Product Quality Standard & Metrology Inspection, Weihai 264200, China
2.
Weihai TuoZhan Fibre Co. Ltd, Weihai 264211, China
3.
Beijing University of Chemical Technology, Beijing 100029, China

Available Online: 2021-08-18
Publish Date: 2021-12-01

Abstract

Abstract

Because of their excellent mechanical properties, polyacrylonitrile(PAN)-based carbon fibers are widely used in aerospace, general industry, high-end sports goods, etc. High purification and densification of carbon fiber precursors is one of the key techniques for the preparation of high-performance carbon fibers. During the extraction and testing of the residual solvent in carbon fiber precursors, boiling water causes the decomposition of the residual solvent in the dimethyl sulfoxide (DMSO), which seriously affects the accurate quantification of the residual solvent in the fibers. A systematic study of accurate extraction and quantification of residual solvent dimethyl sulfoxide (DMSO) in carbon fiber precursors was carried out at the National Measurement and Testing Center for Carbon Fiber Industry. Water, ethanol, acetone, and cyclohexane were used as extraction agents. The effects of extraction agent types, fiber quality, extraction temperature and time, and measuring instruments on the accurate quantification were studied. The extraction conditions and quantitative testing methods were proposed to provide measurement and testing services for improved process control of the preparation of high-performance fibers.
- industrial measurement,
- carbon fiber primordium,
- residual solvent,
- extracting agent,
- quantitative

FullText(HTML)

References(18)

References

[1]	张健, 揣雪冰. 碳纤维的发展及其应用现状[J]. 化工管理, 2017(23): 60. doi: 10.3969/j.issn.1008-4800.2017.23.055
[2]	YOUE W J, LEE S M, LEE S S, et al. Characterization of carbon nanofiber mats produced from electrospun lignin-g-polyacrylonitrile copolymer[J]. International Journal of Biological Macromolecules, 2015(82): 497-504.
[3]	DARREN, A, BAKER, et al. Recent advances in low-cost carbon fiber manufacture from lignin[J]. Journal of Applied Polymer Science, 2013(130): 713-728.
[4]	罗益锋. 处于战略机遇期的全球碳纤维及其复合材料产业[J]. 高科技纤维与应用, 2019(2): 1-20. doi: 10.3969/j.issn.1007-9815.2019.02.001
[5]	顾佳杰. 碳纤维产业发展研究报告[J]. 上海化工, 2019(44): 32-36.
[6]	KAUR J, MILLINGTON K, SMITH S. Producing high-quality precursor polymer and fibers to achieve theoretical strength in carbon fibers: A revie[J]. Journal of Applied Polymer Science, 2016(133): 38.
[7]	赵晓莉, 齐暑华, 刘建军, 等. 干喷湿纺法制备T700级聚丙烯腈基碳纤维[J]. 工程塑料应用, 2019, 4(1): 67-71, 95. doi: 10.3969/j.issn.1001-3539.2019.01.012
[8]	陶磊, 黄元波, 郑云武, 等. 木质素制备低成本碳纤维的研究进展[J]. 高分子材料科学与工程, 2017(33): 179-185, 190.
[9]	WEI H, SUO X, LU C, et al. A comparison of coagulation and gelation on the structures and stabilization behaviors of polyacrylonitrile fibers[J]. Journal of Applied Polymer ence, 2020(137): 19.
[10]	S I Banduryan, M M Lovleca, G A Budnitskii. Formation of the Primary supramolecular structure of Some fiber types in conditions of wet spinning[J]. Fibre Chemistry, 2003, 35(5): 349-251. doi: 10.1023/B:FICH.0000012189.28557.db
[11]	M Murat Ozmen, Oguz Okay. Formation of macroporous poly(acrylamide) hydrogels in DMSO/water mixture: Transition from cryogelation to Phase separation copolymerization[J]. Reactive & Functional Polymers, 2008, 68(10): 1467-1475.
[12]	刘晗, 王晨晖, 谭晶, 等. 碳纤维缺陷演变及其原丝制备工艺研究进展[J]. 高科技纤维与应用, 2021, 46(1): 11-17. doi: 10.3969/j.issn.1007-9815.2021.01.001
[13]	李常清, 张顺, 陈栋, 等. 带型聚丙烯腈纤维制备及其预氧化反应特性研究[J]. 化工新型材料, 2019(47): 156-159.
[14]	支建海, 钱鑫, 张永刚, 等. 国产碳纤维增强树脂基复合材料的界面结合性能研究[J]. 合成纤维工业, 2018, 41(4): 14-17. doi: 10.3969/j.issn.1001-0041.2018.04.004
[15]	李颖华, 刘钟铃, 刘春明, 等. UV测试PAN原丝残余DMSO含量的影响因素研究[J]. 化工新型材料, 2016, 44(8): 178-180.
[16]	李常清, 徐樑华, 王晓玲, 等. 残余溶剂DMSO对PAN纤维结构及热性能的影响[J]. 高分子材料科学与工程, 2003, 19(4): 89-91. doi: 10.3321/j.issn:1000-7555.2003.04.023
[17]	张丽平, 李艳华, 陈秋飞, 等. 聚丙烯腈原丝中二甲基亚砜残留对碳纤维性能的影响[J]. 合成纤维, 2010(9): 13-15. doi: 10.3969/j.issn.1001-7054.2010.09.004
[18]	中国纺织工业联合会. 聚丙烯腈基碳纤维原丝残留溶剂测试方法: FZ/T 50032-2015[S]. 北京: 中国标准出版社, 2015.