Test Method for Resistivity of Alumina Ceramic Material

LIANG Yaxing; WANG Xiufeng; JIN Xiaoxue; WANG Jia; LI Fukun

doi:10.12338/j.issn.2096-9015.2021.0517

Volume 66 Issue 1

Jan. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(1): 22-25

LIANG Yaxing, WANG Xiufeng, JIN Xiaoxue, WANG Jia, LI Fukun. Test Method for Resistivity of Alumina Ceramic Material[J]. Metrology Science and Technology, 2022, 66(1): 22-25. doi: 10.12338/j.issn.2096-9015.2021.0517

Citation:

LIANG Yaxing, WANG Xiufeng, JIN Xiaoxue, WANG Jia, LI Fukun. Test Method for Resistivity of Alumina Ceramic Material[J]. Metrology Science and Technology, 2022, 66(1): 22-25. doi: 10.12338/j.issn.2096-9015.2021.0517

Citation:

PDF( 629 KB)

Test Method for Resistivity of Alumina Ceramic Material

doi: 10.12338/j.issn.2096-9015.2021.0517

Shaanxi University of Science and Technology, Xi’an 710021, China

Available Online: 2021-11-29
Publish Date: 2022-01-24

Abstract

Abstract

In testing of the resistance of an insulator (resistivity higher than 10⁹ Ω·m), the electrode added to it and the contact pressure and contact area between the electrode and the measured material are the key factors that affect the test accuracy. In this paper, the pressure-free sintering technique is used to prepare alumina ceramics containing certain manganese oxide, chromium oxide and silicon oxide components, and a self-made graphite sheet electrode is used to measure its resistance with an insulation resistance tester. The study found that the contact resistance with graphite electrodes is lower than that with silver electrodes. It was also found that the measured resistivity is basically stable, that is, the contact resistance is minimised, when the contact pressure between the graphite electrode and the alumina ceramic is not less than 19 N and the contact area is not less than 63.7 % of the material itself. It is concluded that silver electrodes can be replaced by graphite electrodes for accurate and easy testing of high resistance.
- alumina ceramics,
- resistivity,
- graphite electrode,
- contact resistance,
- contact pressure,
- contact area

FullText(HTML)

References(17)

References

[1]	RIU D H, KONG Y M, KIM H E. Effect of Cr₂O₃ addition on microstructural evolution and mechanical properties of Al₂O₃[J]. J. Euro. Cera. Soc, 2000, 20: 1475-1481. doi: 10.1016/S0955-2219(00)00023-6
[2]	ZHANG H, XU Y, JIN H Y, et al. Effects of Cr₂O₃ addition on mechanical and electrical properties of alumina cerami[J]. Advanced Materials Research, 2014: 513-516.
[3]	刘建, 程利霞, 伍海东, 等. 环境温度和湿度对 96-Al₂O₃陶瓷电阻率的影响[J]. 人工晶体学报, 2017, 46(6): 1083-1087. doi: 10.3969/j.issn.1000-985X.2017.06.021
[4]	LEI Y J, XIAO D Q. Influence of Cr₂O₃ and MnO Additives on the Surface Properties of Alumina Insulator[J]. IEEE Transactions on Dielectrics & Electrical Insulation, 2006, 13(1): 93-97.
[5]	石棋, 郭志猛, 郝俊杰, 等. 高铝陶瓷显微结构及制备工艺对金属化层性能影响的研究[J]. 人工晶体学报, 2007, 36(6): 1382-1385. doi: 10.3969/j.issn.1000-985X.2007.06.039
[6]	陆聪, 杨建, 李晓云, 等. 铬锰复合掺杂对氧化铝陶瓷真空耐压性能的影响[J]. 人工晶体学报, 2016, 45(1): 132-137.
[7]	雷杨俊, 曾敏, 游小凤, 等. 锰铬体掺杂氧化铝陶瓷及其金属化[J]. 真空电子技术, 2007(1): 47-50. doi: 10.3969/j.issn.1002-8935.2007.01.013
[8]	任军军. 绝缘电阻测试仪的原理及在路灯施工中的使用方法[J]. 中国照明电器, 2021(2): 39-41. doi: 10.3969/j.issn.1002-6150.2021.02.008
[9]	STOLYAROV V V, FROLOVA А V, SUDZHANSKAYA I V. Dielectric properties of nanocomposite ceramics Al₂O₃ / graphene processed by spark plasma sintering[J]. Ceramics International, 2020, 46(5): 6920-6925. doi: 10.1016/j.ceramint.2019.11.188
[10]	周宏明, 王博益, 李荐. CuO 掺杂对花钇钡铜氧陶瓷电性能的影响[J]. 材料导报, 2019, 33(1): 220-224.
[11]	瞿瞾, 瞿国瑞, 胡冠昱. 石墨电极的研究与实践[J]. 金属热处理, 2003, 28(11): 56-59. doi: 10.3969/j.issn.0254-6051.2003.11.017
[12]	赵秋培. 大型钛精炉用Ф700mm石墨电极的研制[J]. 河南化工, 2021, 38(4): 54-57.
[13]	SELVARAJAN L, RAJAVEL R, VENKATARAMANAN K, et al. An experimental investigations and optimization of performance measures in EDM using copper and graphite electrodes[J]. Materials Today:Proceedings, 2020(2): 1-7.
[14]	白军信, 李宏杰, 张志旭, 等. 添加剂对氧化铝陶瓷性能的影响[J]. 陶瓷, 2014(10): 9-16. doi: 10.3969/j.issn.1002-2872.2014.10.001
[15]	吴振东, 叶建东. 添加剂对氧化铝陶瓷的烧结和显微结构的影响[J]. 兵器材料科学与工程, 2002, 25(1): 68. doi: 10.3969/j.issn.1004-244X.2002.01.021
[16]	潘良胜. 接触电阻影响因素的研究和分析[J]. 电气制造, 2014(4): 58-60.
[17]	张海泉. 接触电阻的分析研究[J]. 商丘师范学院学报, 2004, 20(5): 40-43. doi: 10.3969/j.issn.1672-3600.2004.05.012