Development of the New Generation National Primary Standard for Gear Helix Calibration

LIN Hu; HUANG Yao; YANG Guoliang; YANG Yu; GU Yuling; ZOU Wei; XUE Zi

doi:10.12338/j.issn.2096-9015.2021.0642

Volume 66 Issue 4

Jun. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(4): 67-73

LIN Hu, HUANG Yao, YANG Guoliang, YANG Yu, GU Yuling, ZOU Wei, XUE Zi. Development of the New Generation National Primary Standard for Gear Helix Calibration[J]. Metrology Science and Technology, 2022, 66(4): 67-73. doi: 10.12338/j.issn.2096-9015.2021.0642

Citation:

LIN Hu, HUANG Yao, YANG Guoliang, YANG Yu, GU Yuling, ZOU Wei, XUE Zi. Development of the New Generation National Primary Standard for Gear Helix Calibration[J]. Metrology Science and Technology, 2022, 66(4): 67-73. doi: 10.12338/j.issn.2096-9015.2021.0642

Citation:

PDF( 1081 KB)

Development of the New Generation National Primary Standard for Gear Helix Calibration

doi: 10.12338/j.issn.2096-9015.2021.0642

National Institute of Metrology, Beijing 100029, China

Available Online: 2022-03-21
Publish Date: 2022-06-02

Abstract

Abstract

Focusing on the goal of establishing a national primary standard for gear helix calibration, the first hybrid gear helix measurement standard has been developed successfully by independent research, which transforms the complex spatial three-dimensional curve measurement into the simultaneous measurement of laser interferometric length measurement and self-calibration rotary angle, originally realizes the shortest traceability chain for the fundamental quantities of length and angle. The calibration and measurement capability of the gear helix measurement primary standard has reached the international advanced level by verification of international comparison results. The helix values obtained from the standard have been widely used in domestic calibration institutions, universities, and gear manufacturing companies, providing strong technical support for the development of the gear industry.
- gear helix,
- national primary standard,
- laser interferometric length measurement,
- self-calibration angle,
- international comparison,
- calibration and measurement capability

FullText(HTML)

References(17)

References

[1]	Goch G, Knapp W, Haertig F. Precision engineering for wind energy systems[J]. CIRP Annals, 2012, 61(2): 611-634.
[2]	周森, 蒋聪, 徐健, 等. 齿轮齿廓的测量方法及不确定度评定[J]. 计量技术, 2017(1): 22-25.
[3]	中国机械通用零部件工业协会齿轮分会. 中国齿轮行业“十三五”发展规划纲要[EB/OL]. (2015-12-31) [2021-11-23]. http://www.cgma.net.cn/download_detail/&downloadsId=131.html.
[4]	刘忠明, 王长路, 张元国, 等. 中国齿轮工业的现状、挑战与2030年愿景——《机械工业工程技术路线图》齿轮部分解读[J]. 机械传动, 2011, 35(12): 1-6. doi: 10.3969/j.issn.1004-2539.2011.12.001
[5]	Frazer R C, Bicker R, Cox B, et al. An international comparison of involute gear profile and helix measurement[J]. Metrologia, 2004, 41(1): 12-16. doi: 10.1088/0026-1394/41/1/003
[6]	Haertig F, Keck C, Kniel K. A novel high accuracy concept for gear calibration[J]. Gear Technology, 2005, 5-6: 16-20.
[7]	Haertig F, Keck C, Kniel K, et al. Development of a novel gear measuring device of high accuracy[C]. Proceedings of the ASME Design Engineering Technical Conference. Chicago, 2003: 853-857.
[8]	Härtig F, Stein M. 3D involute gear evaluation— Part I: Workpiece coordinates[J]. Measurement, 2019, 134: 569-573. doi: 10.1016/j.measurement.2018.10.088
[9]	Stein M, Keller F, Przyklenk A. A Unified Theory for 3D Gear and Thread Metrology[J]. Applied Sciences, 2021, 11: 1-19.
[10]	石照耀, 张斌, 费业泰. 阿贝原则再认识[J]. 仪器仪表学报, 2012, 33(5): 1128-1133. doi: 10.3969/j.issn.0254-3087.2012.05.025
[11]	Goch G. Gear metrology[J]. CIRP Annals - Manufacturing Technology, 2003, 52(2): 659-695. doi: 10.1016/S0007-8506(07)60209-1
[12]	石照耀, 费业泰, 谢华锟. 齿轮测量技术100年——回顾与展望[J]. 中国工程科学, 2003, 5(9): 13-17. doi: 10.3969/j.issn.1009-1742.2003.09.003
[13]	薛梓, 林虎, 黄垚, 等. 两维激光光路齿轮测量装置: 2016104438086[P]. 2016-06-21.
[14]	薛梓, 林虎, 黄垚, 等. 一种可直接溯源的高精度齿轮误差测量方法: 2016104438103[P]. 2016-06-21.
[15]	Hou Jia, Xue Zi, Huang Yao, et al. Effect of varying load on angle measurement deviation of rotary table[C]. Proc SPIE Int Soc Opt Eng, 2019, 11053: 1-9.
[16]	Huang Yao, Xue Zi, Qiao Dan, et al. Study on the metrological performance of self-calibration angle encoder[C]. Proc SPIE Int Soc Opt Eng, 2016, 9684: 1-8.
[17]	林虎, 薛梓, 杨国梁. 螺旋线基准装置测头挠曲误差标定[J]. 计量学报, 2017, 38(6A): 35-38.