Development of Measuring Device for Thickness Deviation of Feeler Gauge

GAO Yuhai

doi:10.12338/j.issn.2096-9015.2022.0009

Volume 66 Issue 3

Mar. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(3): 58-61

GAO Yuhai. Development of Measuring Device for Thickness Deviation of Feeler Gauge[J]. Metrology Science and Technology, 2022, 66(3): 58-61. doi: 10.12338/j.issn.2096-9015.2022.0009

Citation:

GAO Yuhai. Development of Measuring Device for Thickness Deviation of Feeler Gauge[J]. Metrology Science and Technology, 2022, 66(3): 58-61. doi: 10.12338/j.issn.2096-9015.2022.0009

GAO Yuhai. Development of Measuring Device for Thickness Deviation of Feeler Gauge[J]. Metrology Science and Technology, 2022, 66(3): 58-61. doi: 10.12338/j.issn.2096-9015.2022.0009

Citation:

GAO Yuhai. Development of Measuring Device for Thickness Deviation of Feeler Gauge[J]. Metrology Science and Technology, 2022, 66(3): 58-61. doi: 10.12338/j.issn.2096-9015.2022.0009

PDF( 667 KB)

Development of Measuring Device for Thickness Deviation of Feeler Gauge

doi: 10.12338/j.issn.2096-9015.2022.0009

GAO Yuhai

Gansu Institute of Metrology , Lanzhou 730050, China

Accepted Date: 2022-02-20

Available Online: 2022-02-23

Publish Date: 2022-03-08

Abstract

Abstract

In this paper, a measuring device for measuring the thickness deviation of feeler gauge is designed to address the problems of the cumbersome and inefficient measurement process, and the structure and working principle of the measuring device are described in detail. Through the uncertainty assessment of the thickness deviation measurement results of the feeler gauge and the comparison with the length measuring instrument, it is verified that the measurement results of the measuring device are accurate and reliable and can meet the requirements of traceability.
- measuring device,
- feeler gauge,
- thickness deviation,
- micrometer,
- uncertainty

FullText(HTML)

References(15)

References

[1]	国家质量监督检验检疫总局. 塞尺: JJG62-2017[S]. 北京: 中国质检出版社, 2017.
[2]	国家质量监督检验检疫总局. 光栅式测微仪校准规范: JJF1682-2017[S]. 北京: 中国质检出版社, 2017.
[3]	国家质量监督检验检疫总局. 测量不确定度评定与表示: JJF1059.1-2012[S]. 北京: 中国质检出版社, 2012.
[4]	高宇海. 一种测量塞尺厚度的计量装置: ZL201820863962.3[P]. 2019-01-04.
[5]	刘香斌, 陈建军, 吴月艳, 等. 量块比较测量的不确定度评定[J]. 计量技术, 2015(4): 74-77.
[6]	郭立功, 贾志宁, 佟林, 等. 高精度液位计自动检测系统研制[J]. 计量科学与技术, 2021(2): 34-38.
[7]	李小亭. 长度计量[M]. 北京: 中国计量出版社, 2006: 1-361.
[8]	王培强. 卧式投影仪Y轴示值误差校准方法探讨及误差分析[J]. 中国计量, 2013(3): 111-112. doi: 10.3969/j.issn.1006-9364.2013.03.041
[9]	束小梅, 左勇, 徐晓波. 长度光栅测量系统的误差修正技术[J]. 工业计量, 2010(5): 10-13.
[10]	信彦峰, 崔宝, 贾正红, 等. 水大流量标准装置研制[J]. 计量科学与技术, 2021(10): 67-69.
[11]	王树刚, 李惠. 一种基于室内手持式激光测距仪校准装置的研制[J]. 计量科学与技术, 2021(10): 63-66.
[12]	靳浩元, 刘军. 测量不确定度的评定方法及应用研究[J]. 计量科学与技术, 2021(5): 124-131.
[13]	胡安继, 张健, 赵东升, 等. 基于激光干涉法的斜导轨数控机床定位精度检测方法[J]. 计量技术, 2020(1): 34-37.
[14]	陈挺, 金挺. 基于LabVIEW的三针自动校正系统设计[J]. 计量科学与技术, 2021(8): 19-23.
[15]	李在峥. 一种压痕深度测试装置的校准方法[J]. 计量科学与技术, 2021(4): 49-51.