Research on Power Loss Calibration Standards for Network Cable Analyzer

ZHOU Xin; TANG Wei; ZHANG Yan; SHEN Qingfei; ZHOU Xuefen; LI Anxiang; DOU Lilan; ZHANG Yanhui; WU Tong

doi:10.12338/j.issn.2096-9015.2022.0137

Volume 66 Issue 9

Sep. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(9): 33-39

ZHOU Xin, TANG Wei, ZHANG Yan, SHEN Qingfei, ZHOU Xuefen, LI Anxiang, DOU Lilan, ZHANG Yanhui, WU Tong. Research on Power Loss Calibration Standards for Network Cable Analyzer[J]. Metrology Science and Technology, 2022, 66(9): 33-39. doi: 10.12338/j.issn.2096-9015.2022.0137

Citation:

ZHOU Xin, TANG Wei, ZHANG Yan, SHEN Qingfei, ZHOU Xuefen, LI Anxiang, DOU Lilan, ZHANG Yanhui, WU Tong. Research on Power Loss Calibration Standards for Network Cable Analyzer[J]. Metrology Science and Technology, 2022, 66(9): 33-39. doi: 10.12338/j.issn.2096-9015.2022.0137

Citation:

ZHOU Xin, TANG Wei, ZHANG Yan, SHEN Qingfei, ZHOU Xuefen, LI Anxiang, DOU Lilan, ZHANG Yanhui, WU Tong. Research on Power Loss Calibration Standards for Network Cable Analyzer[J]. Metrology Science and Technology, 2022, 66(9): 33-39. doi: 10.12338/j.issn.2096-9015.2022.0137

PDF( 1356 KB)

Research on Power Loss Calibration Standards for Network Cable Analyzer

doi: 10.12338/j.issn.2096-9015.2022.0137

National Institute of Metrology, Beijing 100029, China

Available Online: 2022-09-13
Publish Date: 2022-09-30

Abstract

Abstract

Insertion loss and return loss are the main calibration parameters for network cable analyzers. At present, JJF 1494-2014 Calibration Specification for Network Cable Analyzers provides the corresponding calibration method for category six cables (signal frequency up to 250 MHz). In this paper, based on high-performance RF devices, a power loss calibration standard for network cable analyzer is developed, which is suitable for calibrating parameters of category eight cables (frequency up to 2000 MHz). The vector network analyzer calibrates the above-mentioned standards, and calibration of the high-frequency network cable analyzer is realized.
- metrology,
- calibration,
- vector network analyzer,
- network cable analyzer,
- insertion loss,
- return loss

FullText(HTML)

References(16)

References

[1]	刘烨. OSI参考模型与TCP/IP参考模型的比较研究[J]. 信息技术, 2009, 33(11): 127-128. doi: 10.3969/j.issn.1009-2552.2009.11.037
[2]	郝雁斌. 试论有线传输的技术特点和发展方向[J]. 数字通信世界, 2022(2): 102-103.
[3]	解华. 计算机网络通讯存在的问题及其改进策略[J]. 新型工业化, 2021, 11(9): 160-161. doi: 10.19335/j.cnki.2095-6649.2021.9.071
[4]	管京周, 李世平, 陈世伟, 等. 双绞线的基本概念及应用技巧[J]. 工业控制计算机, 2005(4): 74-75. doi: 10.3969/j.issn.1001-182X.2005.04.036
[5]	Telecommunications Industry Association. Balanced Twisted-Pair Telecommunications Cabling and Components Standard: ANSI/TIA-568.2-D[S]. Arlington, VA USA: Telecommunications Industry Association, Technology and Standards Department, 2018.
[6]	工业和信息化部电子第五研究所, 上海市计量测试技术研究院. 网络线缆分析仪校准规范: JJF 1494-2014[S]. 北京: 中国标准出版社, 2015.
[7]	苏腾, 郭敏, 刘贵斌, 等. 信号源端口电压驻波比测量方法研究[J]. 计量科学与技术, 2022, 66(7): 33-37.
[8]	李胜海. 网络线缆分析仪回波损耗的校准研究[C]//中国计量协会. 2011年“计量为工业现代化服务”技术报告会论文集. 北京: 中国质检出版社, 2011: 623-628.
[9]	李胜海, 杨桥新. 网络线缆分析仪近端串扰的校准研究[J]. 电子产品可靠性与环境试验, 2011, 29(5): 54-57.
[10]	许伟, 陈龙泉, 黄震, 等. 305 m长线缆的回波损耗和近端串扰的测试方法研究[J]. 宇航计测技术, 2017, 37(3): 5-9.
[11]	陈龙泉, 许伟, 黄震, 等. 线缆分析仪远端衰减串音比参数的校准方法研究[J]. 计量学报, 2018, 39(3): 405-409. doi: 10.3969/j.issn.1000-1158.2018.03.24
[12]	周鑫, 沈庆飞, 李安香, 等. 新一代无线设备最大辐射功率测试方法分析[J]. 计量科学与技术, 2021, 65(6): 9-13.
[13]	袁文泽, 谷若晨, 丁晟, 等. 一种新的微波功率比对方法[J]. 计量技术, 2020(5): 109-111.
[14]	Moder M, Schubert J. Characterization of RF and Microwave Measurement Cables Used with Vector Network Analyzers[J/OL]. Microwave Journal, 2022 [2022−08−09]. https://www.microwavejournal.com/articles/37588-characterization-of-rf-and-microwave-measurement-cables-used-with-vector-network-analyzers.
[15]	International Electrotechnical Commission. Specification for the testing of balanced and coaxial information technology cabling–Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards: IEC 61935-1[S]. Geneva, Switzerland: International Electrotechnical Commission, 2015.
[16]	Sunchana P Pucic, William C Daywitt. Single port technique for adaptor efficiency evaluation[C]//Automatic Radio Frequency Techniques Group. 45th ARFTG Conference Digest. New York: IEEE, 1995: 113-118.