Development of Online Tension Calibration Device for Mask Machine

LIN Xiaohui

doi:10.12338/j.issn.2096-9015.2022.0217

Volume 66 Issue 11

Jan. 2023

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(11): 59-63

LIN Xiaohui. Development of Online Tension Calibration Device for Mask Machine[J]. Metrology Science and Technology, 2022, 66(11): 59-63. doi: 10.12338/j.issn.2096-9015.2022.0217

Citation:

LIN Xiaohui. Development of Online Tension Calibration Device for Mask Machine[J]. Metrology Science and Technology, 2022, 66(11): 59-63. doi: 10.12338/j.issn.2096-9015.2022.0217

LIN Xiaohui. Development of Online Tension Calibration Device for Mask Machine[J]. Metrology Science and Technology, 2022, 66(11): 59-63. doi: 10.12338/j.issn.2096-9015.2022.0217

Citation:

LIN Xiaohui. Development of Online Tension Calibration Device for Mask Machine[J]. Metrology Science and Technology, 2022, 66(11): 59-63. doi: 10.12338/j.issn.2096-9015.2022.0217

PDF( 1475 KB)

Development of Online Tension Calibration Device for Mask Machine

doi: 10.12338/j.issn.2096-9015.2022.0217

LIN Xiaohui^{1, 2, 3
,}

1.
Fujian Metrology Institute, Fuzhou 350003, China
2.
Key Laboratory of Force Measurement for State Market Regulation, Fuzhou 350003, China
3.
Fujian Provincial Key Laboratory of Force Measurement, Fuzhou 350003, China

Received Date: 2022-08-23
Accepted Date: 2022-11-24
Rev Recd Date: 2022-11-24

Available Online: 2022-12-01

Publish Date: 2023-01-17

Abstract

Abstract

To ensure the accuracy and reliability of the tension sensor of the mask machine through traceability, a calibration device was designed for online measurement of the tension system without disassembling the sensor and other parts of the mask machine. Using the method of force value step loading, a standard force value is applied along the force axis of the force sensor to measure the tension sensor and complete the online calibration of the metrological characteristics of the tension sensor. The calibration device can be used to accurately measure and calibrate the tension sensor of the mask machine under different working conditions to ensure that the manufactured masks meet the requirements of relevant standards. The calibration device is designed using Solidworks software, and the performance of the device meets the design requirements after metrology testing. The calibration results of the mask machine tension sensor meet the range specified in the standard.
- mask machine,
- tension,
- sensor,
- calibration device,
- metrology

FullText(HTML)

References(15)

References

[1]	卢文东, 曾爱平, 李志宏. 全自动平面口罩机质量状况分析[J]. 机电工程技术, 2021, 50(12): 294-297. doi: 10.3969/j.issn.1009-9492.2021.12.070
[2]	周友华, 王谷洪, 吴国卷, 等. 两种口罩机的技术特点分析及优劣比较[J]. 机电信息, 2022(4): 78-81.
[3]	李锋. 口罩制造机自动鼻线装置的研制[J]. 机电技术, 2011(1): 111-113. doi: 10.3969/j.issn.1672-4801.2011.01.038
[4]	孙琳. 印刷机张力控制系统探讨[J]. 中国设备工程, 2021(15): 108-109. doi: 10.3969/j.issn.1671-0711.2021.15.066
[5]	曾繁昌, 谭思敏. 口罩自动化生产一体机研究[J]. 机电信息, 2020(20): 32-33. doi: 10.3969/j.issn.1671-0797.2020.20.019
[6]	于海城. 基于半自动的口罩折叠机的研究[J]. 科学技术创新, 2020(31): 175-176. doi: 10.3969/j.issn.1673-1328.2020.31.080
[7]	王丽莉, 宋彬. 全自动平面口罩机控制系统设计[J]. 装备制造技术, 2020(11): 128-131. doi: 10.3969/j.issn.1672-545X.2020.11.034
[8]	倪明堂, 赵健州, 方浩贤, 等. 基于模块化设计的KN95全自动折叠口罩生产线关键技术研究[J]. 机电工程技术, 2020, 49(8): 141-144. doi: 10.3969/j.issn.1009-9492.2020.08.045
[9]	成勇, 郑熙云. 一种新型丝网张力计校准装置[J]. 计量技术, 2017(12): 76-78.
[10]	林凤钦. 口罩机结构及控制系统分析与调试[J]. 中国机械, 2020(11): 128-131.
[11]	秦岗, 蒋树炎. 精密数控磨床中直线导轨和滚珠丝杆的应用研究[J]. 装备制造技术, 2021(6): 127-130. doi: 10.3969/j.issn.1672-545X.2021.06.031
[12]	牟志, 沈童. 机床梯形丝杆螺母校准丝锥的设计[J]. 工具技术, 2014(3): 92-92. doi: 10.3969/j.issn.1000-7008.2014.03.042
[13]	原国家质量监督检验检疫总局, 国家标准化管理委员会. 滚珠丝杠副第5部分: 轴向额定静载荷和动载荷及使用寿命: GB/T 17587.5-2008[S]. 北京: 中国标准出版社, 2008.
[14]	张锦. 导轨滑块应如何选型计算[J]. 大科技, 2020(12): 237-238.
[15]	陈汀, 黄其柏. 一种计及滑块裙部变形的滚珠直线导轨副垂直刚度模型[J]. 中国机械工程, 2011, 22(13): 1546-1550.