Calibration and Applications of Multi-Sensor Coordinate Measuring Machines

WEI Hengzheng; WANG Weinong; PEI Limei; GUO Siyi; CUI Jianqiu; XIANG Sisi

doi:10.12338/j.issn.2096-9015.2023.0289

Volume 68 Issue 2

Feb. 2024

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2024 > 68(2): 46-51

WEI Hengzheng, WANG Weinong, PEI Limei, GUO Siyi, CUI Jianqiu, XIANG Sisi. Calibration and Applications of Multi-Sensor Coordinate Measuring Machines[J]. Metrology Science and Technology, 2024, 68(2): 46-51. doi: 10.12338/j.issn.2096-9015.2023.0289

Citation:

WEI Hengzheng, WANG Weinong, PEI Limei, GUO Siyi, CUI Jianqiu, XIANG Sisi. Calibration and Applications of Multi-Sensor Coordinate Measuring Machines[J]. Metrology Science and Technology, 2024, 68(2): 46-51. doi: 10.12338/j.issn.2096-9015.2023.0289

Citation:

PDF( 1423 KB)

Calibration and Applications of Multi-Sensor Coordinate Measuring Machines

doi: 10.12338/j.issn.2096-9015.2023.0289

1.
National Institute of Metrology, Beijing 100029, China

Received Date: 2023-11-18
Accepted Date: 2023-12-22
Rev Recd Date: 2023-12-25

Available Online: 2023-12-28

Publish Date: 2024-02-18

Abstract

Abstract

Multi-sensor Coordinate Measuring Machines (CMM) are becoming increasingly crucial in complex object measurements within advanced manufacturing, leveraging the combination of different sensor types to rapidly acquire comprehensive and accurate data. Calibration of multi-sensor CMMs necessitates consideration of individual sensors' metrological characteristics and their collective features. This paper reviews relevant domestic and international methods and discusses research conducted by the National Institute of Metrology of China. The institute has explored applications in photogrammetric targets and hardness indenter parameters using multi-sensor coordinate technology, developed an optical-mechanical dual-purpose standard, and evaluated the accuracy of combined measurement systems integrating image and contact sensors. Finally, the paper identifies several unresolved issues in multi-sensor coordinate measurement technology.
- metrology,
- multi-sensor,
- coordinate measuring machine,
- data fusion

FullText(HTML)

References(30)

References

[1]	张国雄. 三坐标测量机[M]. 天津: 天津大学出版社, 1999.
[2]	WECKENMANN A, JIANG X, SOMMER K, et al. Multisensor data fusion in dimensional metrology[J]. CIRP Annals - Manufacturing Technology, 2009, 58: 701-721. doi: 10.1016/j.cirp.2009.09.008
[3]	NEUSCHAEFER-RUBE U, EHRIG W, NEUGEBAUER M, et al. Test procedures and artefacts for optical coordinate metrology[J]. SPIE, 2009, 7133: 713304.
[4]	朱嘉. 基于视觉与触觉集成传感的多坐标组合测量系统的研究[D]. 天津: 天津大学, 2010.
[5]	J P Kruth, M Bartscher, S Carmignato, et al. Computed tomography for dimensional metrology[J]. CIRP Annals, 2011, 60(2): 821-842.
[6]	杨泽南, 黄子婴, 查海勇, 等. 基于森林球的工业CT测量不确定度评定与分析[J]. 光学精密工程, 2023, 31(11): 1672-1683. doi: 10.37188/OPE.20233111.1672
[7]	ISO. Geometrical product specifications(GPS)-Acceptance and reverification tests for coordinate measuring systems(CMS)-Part 9: CMMs with multiple probing systems : ISO 10360-9[S]. Geneva: International Organization for Standardization, 2014
[8]	ISO. Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems : ISO 10360-5 [S]. Geneva: International Organization for Standardization, 2010.
[9]	ISO. Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems : ISO 10360-7 [S]. Geneva: International Organization for Standardization, 2011.
[10]	ISO. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Part 8: CMMs with optical distance sensors : ISO 10360-8 [S]. Geneva: International Organization for Standardization, 2013.
[11]	Wei H , Wang W , Pei L , et al. Concentricity calibration of photogrammetry retro-reflector target[C]. International Society for Optics and Photonics, 2016.
[12]	HAMMAD M S , AL-AHMARI A. New developments in coordinate measuring machines for manufacturing industries[J]. Int. J. Metrol. Qual. Eng, 2014, 5 : 101-111.
[13]	GLEN A TURLEY. Evaluation of a multi-sensor horizontal dual arm Coordinate Measuring Machine for automotive dimensional inspection[J]. Int J Adv Manuf Technol, 2014, 72: 1665-1675. doi: 10.1007/s00170-014-5737-3
[14]	JANICE R G, WILLIAM A C. Evaluating a hybrid 3-dimensional metrology system: merging data from optical and touch probe devices[J]. Proc. of SPIE, 2011, 8133: 813301. doi: 10.1117/12.915357
[15]	CARMIGNATO S, VOLTAN A, SAVIO E. Metrological performance of optical coordinate measuring machines under industrial conditions[J]. CIRP Annals - Manufacturing Technology, 2010, 59: 497-500. doi: 10.1016/j.cirp.2010.03.128
[16]	位恒政, 王为农, 裴丽梅, 等. 用于多传感器坐标测量机探测误差评价的薄环规标准器[J]. 光学精密工程, 2016, 24(3): 521-525.
[17]	马小军, 高党忠, 杨蒙生, 等. 应用白光共焦光谱测量金属薄膜厚度[J]. 光学精密工程, 2011, 19(1): 17-22.
[18]	Peter Andersson, Björn Hemming. Determination of wear volumes by chromatic confocal measurements during twin-disc tests with cast iron and steel[J]. Wear, 2015, 338: 95-104.
[19]	V Rishikesan, G L Samuel. Evaluation of surface profile parameters of a machined surface using confocal displacement sensor[J]. Procedia Materials Science, 2014(5): 1385-1391.
[20]	柳晓飞, 邓文怡, 牛春晖, 等. 一种新型光谱共焦位移测量系统研究[J]. 传感器与微系统, 2013, 32(4): 34-36.
[21]	ISO. Geometrical product specification (GPS) – Surface texture: Areal –Part 602: Nominal characteristics of non-contact (chromatic confocal probe) instruments. International Organization for Standardization: ISO 25178-602 [S] . Geneva: International Organization for Standardization, 2010.
[22]	H Nouira, N El-Hayek, X Yuan, et al. Characterization of the main error sources of chromatic confocal probes for dimensional measurement[J]. Measurement Science and Technology, 2014(25): 044011.
[23]	H Nouira, J-A Salgado, N El-Hayek, et al. Setup of a high-precision profilometer and comparison of tactile and optical measurements of standards[J]. Measurement Science and Technology, 2014(25): 044016.
[24]	王为农. 校准: 定义的解读和结果的测量不确定度表达[J]. 计量科学与技术, 2023, 67(2): 58-61.
[25]	位恒政, 王为农, 任国营, 等. 光谱共焦传感器探测误差的研究[J]. 计量学报, 2017, 38(6A): 1-4.
[26]	于宝峰. 金属材料力学性能测试方法发展[J]. 冶金与材料, 2022(4): 150-151.
[27]	李庆. 金属材料硬度的研究[J]. 自动化应用, 2023, 64(z1): 25-28.
[28]	赵国夫. 洛氏硬度计压头对示值的影响[J]. 计量与测试技术, 2009, 36(4): 26-27.
[29]	李杨, 张凯林, 石伟. 激光扫描共聚焦显微镜在微小硬度压痕测量中的应用研究[J]. 计测技术, 2019, 39(6): 46-49.
[30]	位恒政, 王为农, 裴丽梅, 等. 面向任务的坐标测量机测量不确定度评价方法[J]. 计量科学与技术, 2021, 65(5): 115-119,54.