Research on Temperature and Transverse Sensitivity Calibration Techniques for High Precision Vibration Transducers

NI Bo; TIAN Fangyi; ZHAO Man; ZHAO Yongqi; ZHU Wenqi

doi:10.12338/j.issn.2096-9015.2023.0335

Volume 68 Issue 1

Jan. 2024

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2024 > 68(1): 53-62

NI Bo, TIAN Fangyi, ZHAO Man, ZHAO Yongqi, ZHU Wenqi. Research on Temperature and Transverse Sensitivity Calibration Techniques for High Precision Vibration Transducers[J]. Metrology Science and Technology, 2024, 68(1): 53-62. doi: 10.12338/j.issn.2096-9015.2023.0335

Citation:

NI Bo, TIAN Fangyi, ZHAO Man, ZHAO Yongqi, ZHU Wenqi. Research on Temperature and Transverse Sensitivity Calibration Techniques for High Precision Vibration Transducers[J]. Metrology Science and Technology, 2024, 68(1): 53-62. doi: 10.12338/j.issn.2096-9015.2023.0335

Citation:

NI Bo, TIAN Fangyi, ZHAO Man, ZHAO Yongqi, ZHU Wenqi. Research on Temperature and Transverse Sensitivity Calibration Techniques for High Precision Vibration Transducers[J]. Metrology Science and Technology, 2024, 68(1): 53-62. doi: 10.12338/j.issn.2096-9015.2023.0335

PDF( 2441 KB)

Research on Temperature and Transverse Sensitivity Calibration Techniques for High Precision Vibration Transducers

doi: 10.12338/j.issn.2096-9015.2023.0335

1.
Shanghai Precision Metrology and Test Research Institute, Shanghai 201109, China
2.
Shanghai Institute of Space Power-sources, Shanghai 200245, China

Received Date: 2023-12-07
Accepted Date: 2023-12-25
Rev Recd Date: 2023-12-26

Available Online: 2024-01-02

Publish Date: 2024-01-18

Abstract

Abstract

High-precision vibration transducers, extensively employed in aerospace engine vibration monitoring, high and low temperature ground environmental testing, and modal testing, play a critical role in ensuring the reliability of tested equipment. Accurate measurement of these transducers' sensitivity to temperature variations and their transverse sensitivity is crucial for understanding transducer performance, enhancing manufacturing process quality, and guaranteeing the reliability of various ground testing data in product development and production. This paper presents research on key calibration techniques for high-precision vibration transducers, utilizing vibration comparison methods, point-by-point rapid temperature testing technology, and precise measurement of transverse sensitivity. An integrated rapid calibration device for key parameters of vibration transducers was developed using a PXI bus architecture, creating a comprehensive measurement IEWevaluation system. Control and calibration software were developed on the LabView platform to enable integrated control and measurement. This advancement addresses the challenges in rapidly calibrating critical parameters like temperature response and transverse sensitivity. Measurement uncertainty analysis and verification experiments of the calibration device demonstrate this method's ability to meet specific testing requirements for transducer temperature characteristics and transverse sensitivity, optimize transducer design, and ensure stability in high-precision vibration transducers' online operation.
- metrology,
- vibration transducers,
- temperature response,
- transverse sensitivity,
- rapid calibration,
- measurement uncertainty

FullText(HTML)

References(30)

References

[1]	叶湘滨, 熊飞丽, 张文娜. 传感器与测试技术[M]. 北京: 国防工业出版社, 2007: 82-86.
[2]	陆兆峰, 秦旻, 陈禾, 等. 压电式加速度传感器在振动测量系统的应用研究[J]. 仪表技术与传感器, 2007(7): 3-4,9.
[3]	何道清, 张禾, 石明江. 传感器与传感器技术[M]. 北京: 科学出版社, 2020: 1-10.
[4]	李琼, 邓红涛, 李栓明. 传感器技术及应用[M]. 北京: 北京航空航天大学出版社, 2021: 1-10.
[5]	张佑春, 王海荣. 传感器与检测技术[M]. 西安: 西安电子科技大学出版社, 2021: 1-8.
[6]	范卫民, 刘双杰, 王丽爽, 等. MEMS加速度计在防空导弹引信中的应用[J]. 兵器装备工程学报, 2018, 39(3): 75-82.
[7]	杨晓伟. 振动校准现状及发展综述[J]. 宇航计测技术, 2000, 12(6): 41-47.
[8]	于梅, 孙桥. 振动比较法校准技术发展趋势的研究[J]. 中国计量, 2003(9): 55-58.
[9]	国家质量监督检验检疫总局. 压电加速度计检定规程: JJG 233-2008 [S]. 北京: 中国标准出版社, 2008.
[10]	国家质量监督检验检疫总局. 振动与冲击传感器校准方法第21部分: 振动比较法校准: GB/T 20485.21-2007 [S]. 北京: 中国标准出版社, 2007.
[11]	国家技术监督局. 振动与冲击传感器校准方法温度响应比较测试法: GB/T 13823.16-1995 [S]. 北京: 中国标准出版社, 1995.
[12]	国防科学技术工业委员会. 振动与冲击传感器的校准和测试方法: GJB 3236-1998 [S]. 北京: 国家军用标准出版发行部, 1998.
[13]	国家质量监督检验检疫总局. 振动与冲击传感器校准方法第31部分: 横向灵敏度测试: GB/T 20485.31-2011 [S]. 北京: 中国标准出版社, 2011.
[14]	杨欣茹, 王猛, 高莉, 等. 固液捆绑火箭发动机健康诊断技术[J]. 上海航天(中英文), 2022, 39(5): 8-14.
[15]	国家国防科工局. 固体火箭发动机联合试车力学环境测试方法: QJ 21004-2021 [S]. 北京: 中国航天标准化研究所, 2022.
[16]	中国航天科技集团公司. 多维振动试验方法: Q/QJA 108-2013 [S]. 北京: 中国航天标准化与产品保证研究院, 2013.
[17]	中央军委发展部. 卫星整星微振动试验方法: GJB 9707-2020 [S]. 北京: 国家军用标准出版发行部, 2020.
[18]	寇利霞, 王虎成. 振动传感器横向灵敏度对发动机振动测量的影响[J]. 中国战略新兴产业, 2020(12): 11.
[19]	彭月祥. 振动传感器温度灵敏度校准特性研究[D]. 北京: 北京工业大学, 2017.
[20]	高金芳. 振动与冲击传感器的温度响应校准[J]. 宇航计测技术, 1993, 12(2): 58-66.
[21]	杨正玺, 常洪振, 都佳逊, 等. 基于激光多普勒原理的高温振动测量技术[J]. 计测技术, 2018, 38(6): 6-10.
[22]	朱刚, 杨晓伟, 闫磊, 等. 一种振动传感器高温灵敏度绝对校准方法: CN201410636989.5[P]. 2016-05-11.
[23]	高炳涛, 刘溢, 董阿彬, 等. 贴片式压力传感器温度响应特性校准装置温压影响研究[J]. 宇航计测技术, 2022, 42(6): 1-7.
[24]	商一奇, 胡莞鑫, 海樱, 等. 一种用于加速度传感器温度响应校准的隔热试验夹具: CN202110396757.7[P]. 2021-05-28.
[25]	王在旗, 纪金龙, 吕艺晖, 等. 一种压阻式压力传感器温度特性研究[J]. 计量与测试技术, 2022, 49(6): 37-40.
[26]	周渊, 韩桂珍. 校准振动传感器横向灵敏度的矢量测量法[J]. 计量技术, 1981(2): 8-11.
[27]	杨健, 张晓琦, 王建康. 振动传感器横向灵敏度校准数据处理方法[J]. 东北石油大学学报, 2003, 27(3): 77-79,93.
[28]	石曙光. 振动传感器横向灵敏度的检测[J]. 计量技术, 2005 (2): 45, 58.
[29]	李铁民, 杜云松, 姜峣, 等. 一种面向压电式加速度传感器横向灵敏度标定的振动台: CN201610115317.9[P]. 2019-03-05.
[30]	黄成, 郑凯, 倪博, 等. 热模态试验系统高温振动校准测试装置设计[J]. 中国测试, 2022, 48(6): 117-122.