Citation: | WANG Jing, CHEN Xiaolei, DONG Qingyu, ZHANG Guorui, CUI Can. Research on Automated Detection Methods and Device for Geometric Parameters of Quartz Pendulous Reeds[J]. Metrology Science and Technology. doi: 10.12338/j.issn.2096-9015.2024.0034 |
[1] |
吴敏镜. 惯性器件制造技术[M]. 北京: 中国宇航出版社, 1987: 8.
|
[2] |
王春爱. 高精度加速度计的结构设计[D]. 南京: 东南大学, 2009.
|
[3] |
何崴. 提高石英挠性摆式加速度计可靠性的技术途径[J]. 导弹与航天运载技术, 1998(6): 40-46.
|
[4] |
田兴, 李天赐, 李海斌, 等. 超高分辨率石英挠性加速度计设计研究[J]. 新技术新工艺, 2020(5): 21-25.
|
[5] |
付红坡. 石英挠性加速度计参数稳定性分析与建模预测[D]. 北京: 中国运载火箭技术研究院, 2020.
|
[6] |
赵峰轩. 石英摆片高精度低缺陷加工关键技术研究[D]. 长沙: 国防科技大学, 2018.
|
[7] |
崔粲, 聂鲁燕, 李立勇, 等. 石英挠性加速度计温度稳定性改进设计[J]. 中国惯性技术学报, 2022, 30(5): 658-673.
|
[8] |
史柏元. 石英挠性摆片制造工艺[J]. 航天工艺, 1984(4): 16-20.
|
[9] |
周岩, 刘晓胜, 杨乐民, 等. 石英器件加工工艺及最新进展[J]. 中国机械工程, 2000(6): 77-80.
|
[10] |
王静. 一种石英摆片多参数自动化检测装置及方法:202310463623.1[P]. [2024-08-07].
|
[11] |
李西龙. 工件几何量测量方法研究[J]. 科学技术创新, 2021(6): 160-163. doi: 10.3969/j.issn.1673-1328.2021.06.071
|
[12] |
解圳皓. 光谱共焦位移测量光学系统研究[D]. 苏州: 苏州大学, 2021.
|
[13] |
王梓, 石俊凯, 陈晓梅, 等. 光谱共焦测量技术综述[J]. 半导体光电, 2022(4): 752-759.
|
[14] |
邬梓健. 基于光谱共焦传感器的通用工件轮廓实时测量系统的研究[D]. 上海: 华东师范大学, 2022.
|
[15] |
王文娟. 基于光谱共焦原理的表面粗糙度测量方法研究[D]. 西安: 西安理工大学, 2021.
|
[16] |
陈挺, 周闻青, 卢歆, 等. 光谱共焦技术在精密几何量计量测试中的应用[J]. 计测技术, 2015, 35(S1): 4-6.
|
[17] |
Miks A, Novak J, Novak P. Analysis of method for measuring thickness of plane-parallel plates and lenses using chromatic confocal sensor[J]. Applied Optics, 2010, 49(17): 3259-3264. doi: 10.1364/AO.49.003259
|
[18] |
Tong Qing-bin. Accurate measurement method of the thickness of a quartz pendulous reed by combining polarized reflectance and vision image[J]. Journal of Russian Laser Research, 2011, 32(6): 537-546. doi: 10.1007/s10946-011-9244-9
|
[19] |
Rayer Mathieu, Mansfield Daniel. Chromatic confocal microscopy using staircase diffractive surface[J]. APPLIED OPTICS, 2014, 53(23): 5123-5130. doi: 10.1364/AO.53.005123
|
[20] |
冯国华. 基于光谱共焦的厚度检测系统研究[D]. 杭州: 浙江大学, 2020.
|
[21] |
乔杨, 张宁, 刘涛, 等. 基于共焦法透镜中心厚度检测的光学系统设计[J]. 光学技术, 2010, 36(6): 857-859.
|
[22] |
刘雪原. 基于光谱共焦传感器的石英摆片几何参数测量系统研究 [D]. 哈尔滨: 哈尔滨工程大学, 2015.
|
[23] |
汪钦臣, 方益民. 光谱共焦技术精密几何量测量台研制[J]. 中国测试, 2019, 45(11): 79-83. doi: 10.11857/j.issn.1674-5124.2018120010
|
[24] |
张宁. 基于复色共焦法的透明材料厚度检测系统研究[D]. 长春: 长春理工大学, 2012.
|
[25] |
李晶. 基于视觉测量的石英摆片几何尺寸测量方法的研究[D]. 哈尔滨: 哈尔滨工业大学, 2007.
|
[26] |
佟庆彬, 张晓冬, 丁振良, 等. 基于激光视觉的石英摆片厚度精密测量方法[J]. 仪器仪表学报, 2010, 31(6): 1358-1363.
|
[27] |
崔海, 蔡威, 谭定忠, 等. PSD在石英摆片综合参数测试系统中的应用[J]. 传感器技术, 1999, 18(5): 41-43.
|
[28] |
柳晓飞, 邓文怡, 牛春晖, 等. 一种新型光谱共焦位移测量系统研究[J]. 传感器与微系统, 2013(4): 34-36,40. doi: 10.3969/j.issn.1000-9787.2013.04.010
|
[29] |
白军才. 石英摆片综合参数测试系统的研究[D]. 哈尔滨: 哈尔滨工业大学, 1995.
|
[30] |
郑军. 基于CCD的石英摆片参数测量关键技术的研究[D]. 哈尔滨: 哈尔滨工业大学, 2001.
|
[31] |
田春苗. 石英摆片外形参数测量技术研究[D]. 哈尔滨: 哈尔滨工程大学, 2015.
|
[32] |
王华, 张宪民. 整体式空间3自由度精密定位平台的优化设计与试验[J]. 机械工程学报. 2007, 43(3): 66-71.
|
[33] |
王小科, 梁冰, 吕双. C#项目开发全程实录[M]. 第四版. 北京: 清华大学出版社, 2018.
|
[34] |
国家质量监督检验检验总局. 测量不确定度评定与表示: JJF1059.1-2012[S] . 北京: 中国标准出版社, 2012.
|
[35] |
田芳宁. 实验室认可中的测量不确定度评定[D]. 合肥: 合肥工业大学, 2012.
|