Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide

LI Guangyi

doi:10.3969/j.issn.2096-9015.2021.03.08

Volume 65 Issue 3

Mar. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(3): 40-43

LI Guangyi. Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide[J]. Metrology Science and Technology, 2021, 65(3): 40-43. doi: 10.3969/j.issn.2096-9015.2021.03.08

Citation:

LI Guangyi. Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide[J]. Metrology Science and Technology, 2021, 65(3): 40-43. doi: 10.3969/j.issn.2096-9015.2021.03.08

LI Guangyi. Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide[J]. Metrology Science and Technology, 2021, 65(3): 40-43. doi: 10.3969/j.issn.2096-9015.2021.03.08

Citation:

LI Guangyi. Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide[J]. Metrology Science and Technology, 2021, 65(3): 40-43. doi: 10.3969/j.issn.2096-9015.2021.03.08

PDF( 782 KB)

Analysis of an Electrochemical Gas Sensor for Measuring Carbon Monoxide

doi: 10.3969/j.issn.2096-9015.2021.03.08

LI Guangyi

Tongliao Institute of Product Quality and Metrology, Tongliao 028000, China

Available Online: 2021-04-13
Publish Date: 2021-03-12

Abstract

Abstract

As toxic and flammable gas alarms are used in safety protection in petroleum, chemical and other product manufacturers, the linearity, reliability and accuracy of their core sensors are important. Taking an electrochemical gas sensor for detecting carbon monoxide as an example, this paper presents its principles and overall working process, describes the function of its each component, and discusses its performance characteristics in various situations. Finally, the evaluation of the linearity, correlation, response time, and temperature and humidity dependence of the sensor is presented.
- electrochemical gas sensor,
- carbon monoxide,
- temperature and humidity dependence

FullText(HTML)

References(13)

References

[1]	王樉. 一氧化碳检测仪的测量原理与应用[J]. 中国计量, 2010(1): 67. doi: 10.3969/j.issn.1006-9364.2010.01.032
[2]	尚合明. 一氧化碳分析仪的研究与设计[D]. 武汉: 华中科技大学, 2016: 5-34.
[3]	单成祥. 传感器的理论与设计基础及其应用[M]. 北京: 国防工业出版社, 1998: 20-34.
[4]	李广义. 基于LabVIEW的可燃/有毒气体报警器信号采集系统设计[J]. 工业计量, 2017, 27(5): 31-33.
[5]	梁元元. Pt/WC(0001)表面的CO氧化及N掺杂WC团簇的密度泛函理论研究[D]. 杭州: 浙江工业大学, 2017: 2-10.
[6]	刘文龙,张崟,陈垅,等. 电化学法制备PANI/Pt/Al₂ O₃梳状电极及其在气体传感器上的应用研究[J]. 成都大学学报, 2015, 34(4): 391-394.
[7]	杜晋峰,白洋,褚武扬,等. 温度和湿度对Nafion膜氢传感器性能的影响[J]. 北京科技大学学报, 2010, 32(6): 787-791.
[8]	张瑜. 有毒有害气体报警器的工作原理和使用维护[J]. 工艺与设备, 2016, 42(4): 128.
[9]	刘秀琴,张少鹏. 两种有毒气体检测报警标准的对比[J]. 自动化仪表, 2014(11): 23-25. doi: 10.3969/j.issn.1000-0380.2014.11.008
[10]	张敏. 工作场所有毒气体检测报警装置设置规范解读[J]. 劳动保护, 2011(8): 38-39.
[11]	查伟,王丽红,赵建民. 可燃性气体及有毒气体报警器可靠性应用探索[J]. 现代职业安全, 2012(2): 96-98.
[12]	贾保峰,毛志民,翟红明. 可燃及有毒气体报警系统在煤化工企业中的应用研究[J]. 化学工程与装备, 2016(8): 331-334.
[13]	贺欣. 可燃和有毒气体检测报警系统的设计及应用[J]. 化工设计通讯, 2020(3): 120, 141.