作者投稿
专家审稿
编辑办公
Angular Velocity Deviation Calibration in Single Circumference Range
-
摘要: 设计了利用自校准编码器和环形激光陀螺仪对转台角度和角速率进行测量的系统，可以实现单周范围转台角位置以及角速率的测量及数据采集。利用自校准编码器和环形激光陀螺仪搭建了试验平台，实现对转台运动状态进行监测，对采集数据进行分析解算得到角位置及角速率信息。通过在不同转速下实验，计算得到了一系列转台单周范围内角位置以及角速率偏差曲线及其傅里叶变换分析结果。Abstract: An angular velocity measurement system for rotary table using ring laser gyroscope and self-calibration angle encoder is designed, which enables the measurement and data acquisition of the angular position and angular velocity of rotary table in a single circumference range. A test platform is built using a self-calibrating angular encoder and a ring laser gyroscope to monitor the motion state of the rotary table, and the collected data are analyzed to obtain the angular position and angular velocity information. Through experiments at different speeds, a series of angular positions and angular velocity deviation curves and their Fourier transform analysis results in the single circumference range of the rotary table are obtained.
-
Key words:
- metrology /
- angular velocity /
- calibration /
- rotary table /
- self-calibration /
- ring-laser gyroscope
-
图 4 两种方法角位置测量偏差值对比
Figure 4. Comparison of angular position measurement deviation between two methods
图 6 不同方式角速率偏差曲线对比
Figure 6. Comparison of angular velocity deviation curves in different ways
图 8 不同速率下偏差平均值傅里叶成分
Figure 8. Fourier component of average deviation at different velocities
表 1 不同转速下周期性成分幅值倍数关系
Table 1. The relationship between amplitude multiple of periodic components and velocities
6°/s 12°/s 18°/s 24°/s 30°/s 2 1 1.94 2.85 3.76 4.66 4 1 2.08 2.97 3.97 4.92 6 1 2.32 3.10 4.28 5.45 
下载: 导出CSV
-
[1] 国防科学技术工业委员会. 惯性技术测试设备主要性能测试方法: GJB1801-93[S]. 北京, 1993. [2] 国家质量监督监督检验检疫总局. 低速转台校准规范: JJF1210-2008[S]. 北京, 2008. [3] 黄垚, 薛梓, 乔丹. 光学陀螺测角仪计量性能测试[J]. 计量学报, 2017, 38(S1): 64-67. [4] 李星善, 马珣, 袁慧铮, 等. 光纤陀螺角速率延迟特性分析与测试[J]. 导航定位与授时, 2016, 3(1): 69-72. doi: 10.3969/j.issn.2095-8110.2016.01.013 [5] Dan Qiao, Zi Xue, Yao Huang. Study on the calibration method of metrological performance of ring laser gyroscope[P]. Other Conferences, 2016, 10155. [6] 谷玉海, 刘玉龙, 徐小力. 陀螺仪动态角度测量系统的设计[J]. 仪表技术与传感器, 2018(4): 122-126. doi: 10.3969/j.issn.1002-1841.2018.04.028 [7] Fan Wang, Zi Xue, Yao Huang. The calibration of angular velocity deviation among full rotary circle[P]. International Symposium on Precision Mechanical Measurements, 2019, 11343. [8] Yao H, Zi X, Dan Q. The NIM continuous full circle angle standard[J]. Measurement Science and Technology, 2018(29): 74013. [9] 乔丹, 薛梓, 黄垚, 等. 分多读数头位置偏差对测角误差的影响研究[J]. 计量学报, 2017, 38(6): 676-680. doi: 10.3969/j.issn.1000-1158.2017.06.04 [10] WATANABE, Tsukasa. Self-Calibratable Rotary Encoder[J]. Journal of the Japan Society for Precision Engineering, 2016, 82(9): 792-796. doi: 10.2493/jjspe.82.792 [11] Huang Y, Xue Z, Wen X ,et al. Comparison between angle interferometer and angle encoder during calibration of autocollimator[J]. SPIE, 2015, 944601: 944624. [12] Kokuyama W, Watanabe T, Nozato H, et al. Angular velocity calibration system with a self-calibratable rotary encoder[J]. Measurement, 2016, 82: 246-253. doi: 10.1016/j.measurement.2016.01.011 -
点击查看大图
计量
- 文章访问数: 709
- HTML全文浏览量: 396
- PDF下载量: 71
- 被引次数: 0
