Measurement Uncertainty Evaluation Method for Task-Oriented Coordinate Measuring Machines
-
摘要: 针对坐标测量机多不确定度源的分析和合成难题,利用基于球列的坐标测量机21项几何运动误差分离方法和蒙特卡洛模拟算法实现坐标测量机面向任务测量不确定度评价,并建立了基于“互联网+”的坐标测量机的溯源服务体系。省市计量院作为溯源网络节点,协助进行数据采集,包括误差参数、环境参数和仪器参数等。当用户需要进行特定任务测量时,将测量策略发送到中国计量科学研究院并通过网络将结果反馈给客户。该溯源网络在一定程度上减小了溯源链的长度,实现了计量的扁平化。Abstract: To solve the problem of analyzing and synthesizing multiple uncertainty sources of coordinate measuring machines (CMMs), the 21-item geometric motion error separation method of CMMs based on spherical column and Monte Carlo simulation algorithm is used to realize the task-oriented measurement uncertainty evaluation of CMMs, and the traceability service system of CMMs based on “Internet+” is established. The provincial and municipal metrology institutes act as traceability network nodes to assist in data collection, including error parameters, environmental parameters, and instrument parameters. When the user needs to perform task-specific measurements, the measurement strategy is sent to the National Institute of Metrology and the results are fed back to the user via the network. This traceability network reduces the length of the traceability chain to a certain extent and realizes the flattening of measurement.
-
表 1 圆直径计算比较 单位:mm
Table 1. Circle diameter fitting results comparison Unit:mm
编号 计算结果 与NIST数据差值 1 41.8117 −7E-13 2 67.6334 −14E-13 3 1.4175 4E-13 4 35.9850 14E-13 表 2 En值计算
Table 2. Calculation of En Value
位置 X XR UVCMM UR En 空间1 749.9668 749.9661 0.0007 0.00057 0.77 空间2 749.9665 749.9661 0.0007 0.00057 0.45 空间3 749.9659 749.9661 0.0005 0.00057 0.29 空间4 749.9665 749.9661 0.0007 0.00057 0.45 -
[1] 张国雄. 三坐标测量机[M]. 天津: 天津大学出版社, 1999: 315-316. [2] ISO/TC 213. Geometrical Product Specifications (GPS)-Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -Part 3: Use of calibrated workpieces or standards: ISO/TS. 15530-3: 2011[S]. 2011. [3] ISO/TC 213. Geometrical Product Specifications (GPS)-Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation: ISO /TS 15530-4: 2008[S]. 2008. [4] 国家市场监督管理总局. 产品几何技术规范(GPS)坐标测量机(CMM)确定测量不确定度的技术 第4部分: 应用仿真技术评估特定任务的测量不确定度: GB/T 24635.4-2020[S]. 北京: 中国标准出版社, 2020. [5] 国家质量监督检验检疫总局. 《测量不确定度评定与表示: JJF 1059.1-2012. 北京: 中国质检出版社, 2013. [6] Trapet, E., Wäldele, F. The Virtual CMM Concept. Advanced Mathematical Tools in Metrology. World Scientific Publ. Comp., 1996: 238-247. [7] JCGM 101: 2008.Evaluation of measurement data -Supplement 1 to the “Guide to the expression of uncertainty in measurement” Propagation of distributions using a Monte Carlo method. [8] 位恒政, 王为农, 裴丽梅, 等. 基于步距规的坐标测量机的误差补偿方法[J]. 仪器仪表学报, 2010, 31(10): 2375-2380. [9] Schwenke H, Knapp W, Haitjema H. Geometric error measurement and compensation of machines - An update[J]. Annals of the CIRP, 2008, 57(2): 660-675. doi: 10.1016/j.cirp.2008.09.008 [10] Zhang G, Zang Y. A Method for Machine Calibration Using 1D Ball Array[J]. Annals of the CIRP, 1991, 40: 519-522. doi: 10.1016/S0007-8506(07)62044-7 [11] Thedore H. Hopp, Mark S. Levenson. Performance Measures for Geometric Fitting in the NIST Algorithm Testing and Evalution Program for Coordinate Measurement Systems[J]. Journal of Research of the National Institute of Standards and Technology, 1995, 100(5): 563-574. doi: 10.6028/jres.100.042 [12] https://www.nist.gov/pml/sensor-science/dimensional-metrology/algorithm-testing. [13] Xuewei CUI, Hengzheng WEI, Weinong WANG. Research and Evaluation of Geometric Element Data Fitting Software for Coordinate Measurement Machine[C]. ISPEMI2018, 2019, 11053: 1-10.