Certification of Reference Materials for Distillation of Kerosene

SHU Hui; WANG Haifeng; LI Jia; SUN Guohua

doi:10.12338/j.issn.2096-9015.2020.0149

Volume 65 Issue 11

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(11): 35-39

SHU Hui, WANG Haifeng, LI Jia, SUN Guohua. Certification of Reference Materials for Distillation of Kerosene[J]. Metrology Science and Technology, 2021, 65(11): 35-39. doi: 10.12338/j.issn.2096-9015.2020.0149

Citation:

SHU Hui, WANG Haifeng, LI Jia, SUN Guohua. Certification of Reference Materials for Distillation of Kerosene[J]. Metrology Science and Technology, 2021, 65(11): 35-39. doi: 10.12338/j.issn.2096-9015.2020.0149

Citation:

PDF( 575 KB)

Certification of Reference Materials for Distillation of Kerosene

doi: 10.12338/j.issn.2096-9015.2020.0149

National Institute of Metrology, Beijing 100029, China

Available Online: 2021-08-18
Publish Date: 2021-11-01

Abstract

Abstract

This paper studies the atmospheric distillation method based on the method in the national standard GB/T 6536-2010, with the focus on the traceability of the recovered temperature. The consistency between the measured recovered temperatures by a platinum resistance and by a mercury thermometer was achieved. We collaborated with several laboratories to certify the CRM developed. The uncertainty of the certified values U_c (k=2) from the initial boiling temperature to 95% of the recovered temperature ranged from 0.7 ℃ to 4.6 ℃.
- kerosene,
- distillation,
- certified reference material,
- recovered temperature,
- uncertainty

FullText(HTML)

References(12)

References

[1]	中华人民共和国国家质量监督检验检疫总局. 煤油: GB 253-2008[S]. 北京: 中国标准出版社, 2008.
[2]	中华人民共和国国家质量监督检验检疫总局. 3号喷气燃料: GB 6537-2018[S]. 北京: 中国标准出版社, 2018.
[3]	中华人民共和国国家质量监督检验检疫总局. 石油产品常压蒸馏特性测定法: GB/T 6536-2010[S]. 北京: 中国标准出版社, 2010.
[4]	American Society of Materials Measurement (ASTM). Standard test method for distillation of petroleum products and liquid fuels at atmospheric pressure: ASTM D86-17[S]. PA, USA: ASTM international, 2017.
[5]	吴凯峰, 龚瑞昆, 尤世忠. 热电偶热电阻的选择和应用[J]. 工业计量, 1997(7): 33-35.
[6]	王菊香, 邢志娜, 刘洁, 等. 喷气燃料馏程测定重复性精密度的确定[J]. 石油与天然气化工, 2010, 39(2): 161-164. doi: 10.3969/j.issn.1007-3426.2010.02.020
[7]	中华人民共和国国家技术监督局. 一级标准物质技术规范: JJF 1006-1994[S]. 北京: 中国质检出版社, 2018.
[8]	International Society Organization (ISO). Reference materials — General and statistical principles for certification: ISO Guide 35[S]. Geneva, Switzerland: ISO, 2006.
[9]	中华人民共和国国家质量监督检验检疫总局. 工作用玻璃液体温度计国家计量检定规程: JJG 130-2011[S]. 北京: 中国质检出版社, 2011.
[10]	中华人民共和国国家质量监督检验检疫总局. 空盒气压表和空盒气压计国家计量检定规程: JJG 272-2007[S]. 北京: 中国质检出版社, 2007.
[11]	中华人民共和国国家质量监督检验检疫总局. 常用玻璃量器国家计量检定规程: JJG 196-2006[S]. 北京: 中国质检出版社, 2006.
[12]	李咏, 杨晓飞, 陈摇, 等. 喷气燃料馏程测量不确定度的评估[J]. 实验科学与技术, 2013, 11(1): 14-25. doi: 10.3969/j.issn.1672-4550.2013.01.006