Temperature Coefficient Measurement of LED Filament Standard Lamp

ZHAO Weiqiang; YAN Jingyun; LIU Hui; SU Ying

doi:10.12338/j.issn.2096-9015.2020.9043

Volume 65 Issue 5

Jun. 2021

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2021 > 65(5): 46-49

ZHAO Weiqiang, YAN Jingyun, LIU Hui, SU Ying. Temperature Coefficient Measurement of LED Filament Standard Lamp[J]. Metrology Science and Technology, 2021, 65(5): 46-49. doi: 10.12338/j.issn.2096-9015.2020.9043

Citation:

ZHAO Weiqiang, YAN Jingyun, LIU Hui, SU Ying. Temperature Coefficient Measurement of LED Filament Standard Lamp[J]. Metrology Science and Technology, 2021, 65(5): 46-49. doi: 10.12338/j.issn.2096-9015.2020.9043

Citation:

PDF( 688 KB)

Temperature Coefficient Measurement of LED Filament Standard Lamp

doi: 10.12338/j.issn.2096-9015.2020.9043

National Institute of Metrology, Beijing 100029, China

Available Online: 2021-05-28
Publish Date: 2021-06-24

Abstract

Abstract

National Institute of Metrology (NIM) has independently developed LED filament standard lamp. Temperature is the main factor affecting the measurement value of LED filament lamps, and the accurate measurement of the temperature coefficient is required to study and analyze the characteristics of LED filament lamps. This paper introduces the definition and measurement principle of LED temperature coefficient, as well as NIM’s facility to implement the measurement. Experimental measurements of LED filament lamps are performed to analyze the relationship between lamp voltage, total luminous flux value and reference point temperature. The linear expressions of the total luminous flux value versus the reference point temperature and the lamp voltage versus the reference point temperature are fitted using the least squares method, and the temperature coefficients of the luminosity value and the lamp voltage are calculated sequentially. The experimental data show that the developed LED filament lamp has a photometric temperature coefficient of 0.17%/°C and a voltage temperature coefficient of −0.025 V/°C.
- temperature coefficient,
- standard lamp,
- LED,
- photometry,
- metrology

FullText(HTML)

References(15)

References

[1]	陈大华. 照明光源的发展历程及未来展望[J]. 照明工程学报, 2019, 30(1): 10-14.
[2]	Zwinkels, J. 2016 CCPR Activities related to LED-based calibration standards[C]. Proceedings of CIE 2016 Lighting Quality and Energy Efficiency. Melbourne: Australia, 2016: 157-165.
[3]	Kokka A, Poikonen T, Blaterner P, et al. Development of white LED illuminants for colorimetry and recommendation of white LED reference spectrum for photometry[J]. Metrologia, 2018, 55(4): 526-534. doi: 10.1088/1681-7575/aacae7
[4]	Zong Y, Zhao W, Miller C. 2019 Standard LEDs with superior long-term stability[C]. Proceedings of 29th CIE Session. Washington: USA, 2019: 101-104.
[5]	Ivashin E, Ogarev S, Khlevnoy B, et al. High power LED standard light sources for photometric applications[C]. 13th International Conference on New Developments and Applications in Optical Radiometry, Journal of Physics: Conference Series 972, 2018: 012009.
[6]	Gerloff T, Kallenbach L, Ledig J, et al. Luminous intensity comparison based on new standard lamps with LED reference spectrum[C]. Proceedings of 29th CIE Session. Washington: USA, 2019: 77-84.
[7]	Nakazawa Y, Godo K, Niwa K, et al. Development of LED-based standard source for total luminous flux calibration[J]. Lighting. Res. Technol, 2019, 51(6): 870-882. doi: 10.1177/1477153518800746
[8]	刘慧, 刘建, 赵伟强, 等. 一种基于LED灯丝灯的标准灯的研制[J]. 照明工程学报, 2017, 28(2): 13-16. doi: 10.3969/j.issn.1004-440X.2017.02.003
[9]	Liu H, Liu J, Zhao W, et al. Study on the possibility of LED filament lamp as photometric standard[C]. Proceedings of the Conference on Smarter Lighting for Better Life at the CIE Midterm Meeting. Jeju: South Korea, 2017: 564-568.
[10]	Yan J Y, Liu H, Zhao W Q, et al. 2019 LED filament standard lamps for total luminous flux and luminous intensity[C]. Proceedings of 29th CIE Session. Washington: USA, 2019: 1274-1282.
[11]	刘慧, 魏岚, 赵伟强, 等. 可见波段LED光谱标准灯的研制[J]. 照明工程学报, 2019, 30(2): 1-3, 7.
[12]	张波, 俞安琪. LED结温与光色参数的关系及结温极限[J]. 照明工程学报, 2018, 29(1): 29-33. doi: 10.3969/j.issn.1004-440X.2018.01.006
[13]	刘旭文, 林上飞, 刘木清. 环境温度和驱动电流对LED的峰值波长的影响[J]. 2020, 31(1): 16-21.
[14]	周太明. 光源原理与设计[M]. 上海: 复旦大学出版社, 2009: 408-409.
[15]	Park S, Kim Y, Lee D, et al. Preparation of a standard light-emitting diode (LED) for photometric measurements by functional seasoning[J]. Metrologia, 2006(43): 299-305.