The Development of Small Pulling Force Gauge Calibration Device

ZHANG Duoli; JIN Longxue; WU Yueming

doi:10.12338/j.issn.2096-9015.2021.0037

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > Accepted Manuscript

ZHANG Duoli, JIN Longxue, WU Yueming. The Development of Small Pulling Force Gauge Calibration Device[J]. Metrology Science and Technology. doi: 10.12338/j.issn.2096-9015.2021.0037

Citation:

ZHANG Duoli, JIN Longxue, WU Yueming. The Development of Small Pulling Force Gauge Calibration Device[J]. Metrology Science and Technology. doi: 10.12338/j.issn.2096-9015.2021.0037

ZHANG Duoli, JIN Longxue, WU Yueming. The Development of Small Pulling Force Gauge Calibration Device[J]. Metrology Science and Technology. doi: 10.12338/j.issn.2096-9015.2021.0037

Citation:

ZHANG Duoli, JIN Longxue, WU Yueming. The Development of Small Pulling Force Gauge Calibration Device[J]. Metrology Science and Technology. doi: 10.12338/j.issn.2096-9015.2021.0037

PDF( 463 KB)

The Development of Small Pulling Force Gauge Calibration Device

doi: 10.12338/j.issn.2096-9015.2021.0037

Harbin Metrology Institute of Measurement and Verification, Harbin 150036, China

Available Online: 2022-06-20

Abstract

Abstract

Point at present situation of measuring small pulling forcegauge inmetrological service,small pulling forcegauge calibration device was developed,so some matterswhensmallpulling forcegauge is measured usingWeight,for example ,heavy working intensity,unablezeroed and full scale range cannot be measured ,can be solved.
- small pulling force gauge,
- metrology,
- calibration device,
- force sensor

FullText(HTML)

References(15)

References

[1]	孙桓, 陈作模, 葛文杰. 机械原理[M]. 北京: 高等教育出版社, 2006: 109-208.
[2]	濮良贵. 机械设计[M]. 北京: 高等教育出版社,
[3]	蔡银才. 一种测力机构的设计与应用[J]. 黑龙江科技信息, 2013(21): 92-93.
[4]	董延庭, 姚文峰, 杜成功. 一种管形测力计检定装置的研制[J]. 科技创新与应用, 2018(20): 26-27.
[5]	张伟, 张智敏, 李楠. 叠加式力标准机检定幸存者偏差初探[J]. 计量科学与技术, 2021, 65(5): 89-92. doi: 10.12338/j.issn.2096-9015.2020.9049
[6]	肖江文, 曾琼. 工作测力计测量结果的不确定度评定[J]. 质量探索, 2007(8): 26-27.
[7]	唐建斌, 李俊, 韩义和. 数显测力计的调修方法[J]. 上海计量测试, 1999(6): 48-49.
[8]	范笑波. 一种新型工作测力仪检定装置的研制[J]. 科技与创新, 2017(10): 127-128.
[9]	甘逵, 戴林, 陈红江, 等. 标准测力仪力值复现影响因素试验分析[J]. 计量技术, 2020(6): 30-35.
[10]	焦献瑞. 测力仪校准方法的比较[J]. 航空计测技术, 2000(4): 10-12.
[11]	黄炯力, 史哲, 曹进. 多功能工作测力仪检定装置的探索[J]. 机电设备, 2016, 33(2): 12-15.
[12]	陈勇, 于江. 建立测力仪标准装置的方案探讨[J]. 装备制造技术, 2017(5): 215-217. doi: 10.3969/j.issn.1672-545X.2017.05.067
[13]	陈勇, 于江. 基于标准测力仪[J]. 装备制造技术, 2017(5): 215-217. doi: 10.3969/j.issn.1672-545X.2017.05.067
[14]	王宇飞, 任凤章, 张旦闻, 等. 车削测力仪在机标定的标定装置及标定方法[J]. 计量学报, 2015, 36(6): 603-606. doi: 10.3969/j.issn.1000-1158.2015.06.11
[15]	董延庭, 杜成功. 气动型推拉力计检定装置的研究[J]. 计量与测试技术, 2018, 45(6): 44-46.