Overview of Measurement Technical Regulations for Off-Site Motor Vehicle Law Enforcement Monitoring Devices

LIU Kun; NIU Feng; HUANG Jie

doi:10.12338/j.issn.2096-9015.2021.0608

Volume 66 Issue 7

Aug. 2022

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(7): 50-53

LIU Kun, NIU Feng, HUANG Jie. Overview of Measurement Technical Regulations for Off-Site Motor Vehicle Law Enforcement Monitoring Devices[J]. Metrology Science and Technology, 2022, 66(7): 50-53. doi: 10.12338/j.issn.2096-9015.2021.0608

Citation:

LIU Kun, NIU Feng, HUANG Jie. Overview of Measurement Technical Regulations for Off-Site Motor Vehicle Law Enforcement Monitoring Devices[J]. Metrology Science and Technology, 2022, 66(7): 50-53. doi: 10.12338/j.issn.2096-9015.2021.0608

Citation:

PDF( 533 KB)

Overview of Measurement Technical Regulations for Off-Site Motor Vehicle Law Enforcement Monitoring Devices

doi: 10.12338/j.issn.2096-9015.2021.0608

1.
Jiangxi Institute of Metrology and Testing, Nanchang 330002, China
2.
National Institute of Metrology, Beijing 100029, China
3.
Beijing University of Chemical Technology, Beijing 100029, China

Accepted Date: 2022-03-02

Available Online: 2022-03-08

Publish Date: 2022-08-04

Abstract

Abstract

Off-site law enforcement comes is an important means for investigations into unlawful acts of motor vehicles. The metrological performance of monitoring devices, however, directly affects the accuracy and impartiality of law enforcement. By collating the monitoring equipment used by traffic police, environmental protection, and traffic competent authorities for off-site enforcement of motor vehicles and their metrological specifications, the characteristics of the monitoring equipment for off-site enforcement of motor vehicles and the existing verification and calibration methods are sorted out and analyzed, and the monitoring system for motor vehicle honking is used as an example to make recommendations on the verification and calibration methods for monitoring equipment.
- off-site law enforcement,
- monitoring devices,
- verification,
- monitoring system for motor vehicle honking,
- calibration

FullText(HTML)

References(18)

References

[1]	中华人民共和国公安部. 道路交通安全违法行为处理程序规定[Z]. 北京, 2008.
[2]	中华人民共和国交通运输部. 超限运输车辆行驶公路管理规定[Z]. 北京, 2016.
[3]	中华人民共和国环保保护总局. 全国环境监测仪器设备管理规定[Z]. 北京, 1991.
[4]	中华人民共和国环保部. 中华人民共和国大气污染防治法[Z]. 北京, 1987.
[5]	中华人民共和国环境保护部. 京津冀及周边地区2017年大气污染防治工作方案[Z]. 北京, 2017.
[6]	国家质量监督检验检疫总局. 汽车、挂车及汽车列车外廓尺寸、轴荷及质量限值: GB 1589-2016 [S]. 北京: 中国标准出版社, 2016.
[7]	国家质量监督检验检疫总局. 动态公路车辆自动衡器检定规程: JJG 907-2006 [S]. 北京: 中国标准出版社, 2006.
[8]	杨欢. 浅谈公路超载超限非现场执法系统检定中存在的问题及解决方法[J]. 衡器, 2019, 48(4): 33-34. doi: 10.3969/j.issn.1003-5729.2019.04.013
[9]	陈力. 机动车雷达测速仪检测的现状及测速误差分析[J]. 计量与测试技术, 2016, 43(5): 42-44.
[10]	李震. 地感线圈测速系统测速误差原因分析及解决方法[J]. 数码世界, 2019(12): 47-48.
[11]	陈增典, 吝小龙, 李建军, 等. 国际建议OIML R 134-1: 2006 《动态公路车辆自动衡器》带来的困惑[J]. 衡器, 2019, 48(11): 25-29. doi: 10.3969/j.issn.1003-5729.2019.11.013
[12]	王小曼, 孙晓霆. 地感线圈测速仪检定装置研制中消除定时误差的设计方法[J]. 计量技术, 2017(7): 34-36.
[13]	陈增典, 王建云, 韩莉洁, 等. 非现场执法设备现状分析与治理[J]. 衡器, 2020, 49(10): 44-46. doi: 10.3969/j.issn.1003-5729.2020.10.013
[14]	李淳, 王广成. 浅谈校时对机动车区间测速监测系统的影响[J]. 计量技术, 2020(7): 51-53.
[15]	孙桥, 蔡常青, 张跃, 等. 两类机动车测速仪现场检测技术的现状及应用探讨[J]. 中国计量, 2012(5): 103-104. doi: 10.3969/j.issn.1006-9364.2012.05.085
[16]	白银, 孙桥, 杜磊, 等. 移动式机动车现场标准测速仪溯源技术的研究[J]. 计量学报, 2015, 36(1): 72-76. doi: 10.3969/j.issn.1000-1158.2015.01.16
[17]	孙桥, 杜磊, 白杰, 等. 全国非接触式汽车速度计比对的研究[J]. 计量学报, 2020, 41(11): 1386-1390. doi: 10.3969/j.issn.1000-1158.2020.11.12
[18]	牛锋, 何龙标, 秦朝琪, 等. 机动车鸣笛抓拍中的计量问题[J]. 计量技术, 2020(4): 3-5.