Development of Calibration Device for Defibrillator Analyzer Based on Sampling Integral Method

ZHANG Junle; ZHOU Wei; TANG Yuanhui; SHI Leping

doi:10.12338/j.issn.2096-9015.2021.0663

Volume 66 Issue 12

Feb. 2023

Turn off MathJax

Article Contents

Article Navigation > Metrology Science and Technology > 2022 > 66(12): 41-45

ZHANG Junle, ZHOU Wei, TANG Yuanhui, SHI Leping. Development of Calibration Device for Defibrillator Analyzer Based on Sampling Integral Method[J]. Metrology Science and Technology, 2022, 66(12): 41-45. doi: 10.12338/j.issn.2096-9015.2021.0663

Citation:

ZHANG Junle, ZHOU Wei, TANG Yuanhui, SHI Leping. Development of Calibration Device for Defibrillator Analyzer Based on Sampling Integral Method[J]. Metrology Science and Technology, 2022, 66(12): 41-45. doi: 10.12338/j.issn.2096-9015.2021.0663

Citation:

PDF( 1480 KB)

Development of Calibration Device for Defibrillator Analyzer Based on Sampling Integral Method

doi: 10.12338/j.issn.2096-9015.2021.0663

Shanxi Institute of Metrology Science, Xi'an 710100, China

Received Date: 2021-12-03
Accepted Date: 2022-01-12

Available Online: 2023-01-10

Publish Date: 2022-12-18

Abstract

Abstract

A defibrillation analyzer calibration device based on high-speed discrete sampling integral method is introduced. The device directly measures the defibrillation current and voltage at the load end through high-speed sampling, and calculates the actual output energy through integration and summation to realize the metrological traceability. The basic principle, system composition and hardware and software design of the calibration device are described in detail, and the experiments prove that the main technical specifications of the device meet the design requirements.
- defibrillator analyzer,
- calibration device,
- energy generation,
- energy release,
- signal acquisition

FullText(HTML)

References(16)

References

[1]	魏川, 王林, 鄢铃. 心脏除颤器检测校准设备溯源方法研究[J]. 中国测试, 2011, 37(5): 34-36.
[2]	国家质量监督检验检疫总局. 心脏除颤器校准规范: JJF 1149-2014 [S]. 北京: 中国标准出版社, 2015.
[3]	羊月祺, 许万春, 钱英. 心脏除颤器质量检测探讨[J]. 中国医疗设备, 2011, 26(9): 67-69. doi: 10.3969/j.issn.1674-1633.2011.09.018
[4]	邱静, 夏雨佳, 董唯. 心脏除颤器的校准方法探讨[J]. 计量与测试技术, 2015, 42(12): 25-26. doi: 10.15988/j.cnki.1004-6941.2015.12.010
[5]	国家市场监督管理总局. 除颤器分析仪校准规范: JJF 1860-2020 [S]. 北京: 中国标准出版社, 2021.
[6]	姚国红, 张亚冬, 李岩峰, 等. 除颤能量标准源的研制[J]. 医疗卫生装备, 2015, 36(9): 10-13,33.
[7]	温润龙, 李亮华, 陈伟胜, 等. 医院在用体外心脏除颤器检测及影响因素统计分析研究[J]. 中国医疗设备, 2020, 35(8): 27-30, 35.
[8]	张煌辉, 邵海明, 赵伟, 等. 除颤器分析仪校准装置的研究[J]. 电测与仪表, 2019, 56(11): 140-144. doi: 10.19753/j.issn1001-1390.2019.011.023
[9]	贾建革, 张亚冬, 武文君, 等. 除颤器释放能量溯源方法的研究[J]. 中国医疗设备, 2014, 29(6): 54-57. doi: 10.3969/j.issn.1674-1633.2014.06.019
[10]	廖金红. 自动体外除颤器生理信号采集系统的研究[D]. 武汉: 武汉理工大学, 2012.
[11]	穆小星, 张健, 段梅梅. 采样率及数值积分算法对数字化电能计量误差影响分析[J]. 计量技术, 2014(12): 3-6.
[12]	季力. 基于STM32芯片的电参数测量与数据传输[J]. 自动化与仪器仪表, 2010(3): 137-139. doi: 10.3969/j.issn.1001-9227.2010.03.055
[13]	赵科佳, 杨智君, 吴昭春, 等. 脉冲波形参数量值溯源体系的完善与发展[J]. 计量技术, 2020(5): 60-67.
[14]	贺俊宾, 周嘉铭, 陈岳飞, 等. 基于变分贝叶斯高斯混合模型的自适应不均衡数据综合采样[J]. 计量科学与技术, 2020(10): 60-67. doi: 10.3969/j.issn.2096-9015.2020.10.16
[15]	吕世雄. 心脏除颤器释放能量测量结果不确定度的评定[J]. 中国计量, 2020(8): 107-109. doi: 10.16569/j.cnki.cn11-3720/t.2020.08.038
[16]	周鑫, 唐维, 张妍, 等. 网络线缆分析仪功率损耗校准标准器的研究[J]. 计量科学与技术, 2022, 66(9): 33-39. doi: 10.12338/j.issn.2096-9015.2022.0137