Citation: | LV Qi, WANG Junbo, ZHANG Ying, LIU Zhihua, XIA Yan, CAI Chenguang. Design Study on the Measurability of Low-Frequency Standard Shaker[J]. Metrology Science and Technology, 2022, 66(4): 101-107, 88. doi: 10.12338/j.issn.2096-9015.2021.0675 |
[1] |
严普强, 乔陶鹏. 工程中的低频振动测量与其传感器[J]. 振动、测试与诊断, 2002, 22(4): 247-253. doi: 10.3969/j.issn.1004-6801.2002.04.001
|
[2] |
董雪明, 何懿才, 关伟. 加速度计校准技术综述[J]. 计测技术, 2014(4): 5-9.
|
[3] |
Liu Z , Cai C , Lv Q, et al. Improved Control of Linear Motors for Broadband Transducer Calibration[J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1004910.
|
[4] |
李靖, 张峰, 孟春雷, 等 [J]. 对装备可计量性的思考国防科技, 2020, 41(1): 21-23.
|
[5] |
蒋薇. 装备可计量性的相关性模型研究 [D]. 长沙: 国防科学技术大学, 2012.
|
[6] |
黄传跃. 重型直升机发展与应用 [M]. 北京: 航空工业出版社, 2017.
|
[7] |
文裕武, 温清澄. 现代直升机应用及发展 [M]. 北京: 航空工业出版社, 2000.
|
[8] |
徐卫国, 刘天坤, 侯健, 等. 直升机专用检测设备计量保障[J]. 国防科技, 2020, 41(1): 17-20.
|
[9] |
王胜超, 樊哲, 欧佳. 融入军用飞机研制设计流程的计量保证技术研究[J]. 计量与测试技术, 2020, 47(2): 38-42.
|
[10] |
李艳红. 专用测试设备计量管理的问题及对策[J]. 质量与可靠性, 2012, 15(1): 56-59.
|
[11] |
董锁利. 论装备可计量性设计专业化的必然性[J]. 计量信息化与管理, 2013, 33(1): 38-40.
|
[12] |
王朝, 蔡晨光, 杨明, 等. 基于激光干涉仪数字信号解码的振动校准方法[J]. 计量学报, 2021, 42(3): 282-286. doi: 10.3969/j.issn.1000-1158.2021.03.04
|
[13] |
杨明, 蔡晨光, 刘志华, 等. 基于外差激光干涉法的三轴向振动绝对校准方法研究[J]. 计量学报, 2018, 39(2): 201-206. doi: 10.3969/j.issn.1000-1158.2018.02.13
|
[14] |
叶文, 蔡晨光, 杨平, 等. 惯性技术计量领域若干问题的思考与展望[J]. 计量科学与技术, 2021, 65(3): 9-14,52.
|
[15] |
肖宇行, 左爱斌, 杨琪琪. 激光测振位置对加速度计校准结果影响研究[J]. 计量科学与技术, 2020(10): 26-31. doi: 10.3969/j.issn.2096-9015.2020.10.08
|
[16] |
杨明. 基于机器视觉的低频振动校准关键技术研究 [D]. 北京: 北京化工大学, 2020.
|
[17] |
Yang Ming, Cai Chenguang, Liu Zhihua, et al. Monocular vision-based calibration method for determining the frequency characteristics of low-frequency accelerometer[J]. IEEE Sensors Journal, 2021, 21(4): 4377-4384. doi: 10.1109/JSEN.2020.3035581
|
[18] |
Yang Ming, Wang Ying, Cai Chenguang, et al. Monocular vision-based low-frequency vibration calibration method with correction of the guideway bending in a long-stroke shaker[J]. Optics Express, 2019, 27(11): 15968-15981. doi: 10.1364/OE.27.015968
|