Citation: | ZHANG Wenge, LIU Wei, LIU Junjie, ZOU Yaxiong, XU Xiao. Establishment of Metrological Traceability System for Mass Concentration of Ambient Air Particle[J]. Metrology Science and Technology, 2022, 66(10): 10-15. doi: 10.12338/j.issn.2096-9015.2022.0166 |
[1] |
EPA. Environmental Protection Agency 40 CFR Part 50: National primary and secondary ambient air quality standards [S]. US: EPA, 2006.
|
[2] |
EPA. Environmental Protection Agency 40 CFR Parts 53 and 58: Revisions to Ambient Air Monitoring Regulations [S]. US: EPA, 2006.
|
[3] |
European Committee for Standardization. BS EN 14907-2005: Ambient air quality. Standard gravimetric measurement method for the determination of the PM2.5 mass fraction of suspended particulate matter [S]. UK: BSI, 2005.
|
[4] |
张文阁, 刘巍, 许潇, 等. PM2.5监测仪检测用国家一级标准物质的研制[J]. 计量学报, 2019, 40(1): 159-163.
|
[5] |
张文阁, 周文刚, 许潇, 等. PM10监测仪检测用国家一级标准物质的研制[J]. 中国计量, 2020(2): 83-85.
|
[6] |
张文阁. PM2.5切割器切割特性检测用标准物质的定值方法及测量系统: CN201611104452. X[P]. 2020-02-14.
|
[7] |
张文阁, 许潇. PM2.5切割器切割特性检测装置: ZL201720651780.5[P]. 2017-12-12.
|
[8] |
陈仲辉, 张文阁, 黄星亮, 等. PM2.5切割器切割特性研究[J]. 中国计量, 2014(8): 82-85.
|
[9] |
张文阁, 高思田, 宋小平, 等. 细颗粒物PM2.5浓度测量及计量技术[J]. 中国粉体技术, 2013, 19(6): 69-72.
|
[10] |
张文阁, 许潇. PM2.5切割器D50不确定度的测定方法及系统: ZL201710416703.6[P]. 2017-09-22.
|
[11] |
王婷, 刘巍, 张明, 等. 切割器切割特性试验装置的功能性验证方法探讨[J]. 计量科学与技术, 2022, 66(1): 41-45.
|
[12] |
张文阁. PM2.5质量浓度监测仪校准装置: ZL201621463092.8[P]. 2017-09-12.
|
[13] |
张文阁, 高思田, 宋小平, 等. PM2.5颗粒物采样器校准装置设计及技术关键[J]. 中国粉体工业, 2014(1): 17-18.
|
[14] |
张文阁, 刘巍, 陈仲辉, 等. PM2.5重量法标准装置研制及溯源性研究[J]. 计量技术, 2015(1): 3-7.
|
[15] |
张文阁. JJF1659-2017《PM2.5质量浓度测量仪校准规范》解读[J]. 中国计量, 2019(2): 89-92,114.
|
[16] |
张文阁, 许潇, 刘俊杰. 中国、英国PM2.5质量浓度溯源方法双边比对[J]. 中国计量, 2021(6): 70-73.
|
[17] |
国家市场监督管理总局. 环境空气 颗粒物质量浓度测定 重量法: GB/T 39193-2020[S]. 北京: 中国标准出版社, 2020.
|
[18] |
国家市场监督管理总局. 颗粒 生物气溶胶采样器 技术条件: GB/T 39990-2021[S]. 北京: 中国标准出版社, 2021.
|
[19] |
生态环境部. 环境空气颗粒物(PM10和PM2.5)连续自动监测系统技术要求及检测方法: HJ 653-2021[S]. 北京: 中国环境科学出版社, 2021.
|
[20] |
中国颗粒学会, 北京粉体技术协会. 光散射原理细颗粒物(PM2.5)质量浓度测量仪性能测试方法: T/CSP T/BSPT 003-2018[S]. 北京: 中国颗粒学会, 2018.
|
[21] |
国家市场监督管理总局. 烟尘采样器: JJG 680-2021[S]. 北京: 中国质检出版社, 2021.
|
[22] |
国家质量监督检验检疫总局. PM2.5质量浓度测量仪校准规范: JJF 1659-2017 [S]. 北京: 中国质检出版社, 2017.
|
[23] |
国家质量监督检验检疫总局. 大气采样器: JJG 956-2013[S]. 北京: 中国质检出版社, 2013.
|
[24] |
国家质量监督检验检疫总局. 烟尘采样器型式评价大纲: JJF 1332-2011[S]. 北京: 中国质检出版社, 2011.
|
[25] |
国家质量监督检验检疫总局. 粉尘浓度测量仪: JJG 846-2015[S]. 北京: 中国质检出版社, 2015.
|
[26] |
国家市场监督管理总局. 粉尘浓度测量仪型式评价大纲: JJF 1716-2018[S]. 北京: 中国质检出版社, 2018.
|