Citation: | LIN Xiaohui. Development of Online Tension Calibration Device for Mask Machine[J]. Metrology Science and Technology, 2022, 66(11): 59-63. doi: 10.12338/j.issn.2096-9015.2022.0217 |
[1] |
卢文东, 曾爱平, 李志宏. 全自动平面口罩机质量状况分析[J]. 机电工程技术, 2021, 50(12): 294-297. doi: 10.3969/j.issn.1009-9492.2021.12.070
|
[2] |
周友华, 王谷洪, 吴国卷, 等. 两种口罩机的技术特点分析及优劣比较[J]. 机电信息, 2022(4): 78-81.
|
[3] |
李锋. 口罩制造机自动鼻线装置的研制[J]. 机电技术, 2011(1): 111-113. doi: 10.3969/j.issn.1672-4801.2011.01.038
|
[4] |
孙琳. 印刷机张力控制系统探讨[J]. 中国设备工程, 2021(15): 108-109. doi: 10.3969/j.issn.1671-0711.2021.15.066
|
[5] |
曾繁昌, 谭思敏. 口罩自动化生产一体机研究[J]. 机电信息, 2020(20): 32-33. doi: 10.3969/j.issn.1671-0797.2020.20.019
|
[6] |
于海城. 基于半自动的口罩折叠机的研究[J]. 科学技术创新, 2020(31): 175-176. doi: 10.3969/j.issn.1673-1328.2020.31.080
|
[7] |
王丽莉, 宋彬. 全自动平面口罩机控制系统设计[J]. 装备制造技术, 2020(11): 128-131. doi: 10.3969/j.issn.1672-545X.2020.11.034
|
[8] |
倪明堂, 赵健州, 方浩贤, 等. 基于模块化设计的KN95全自动折叠口罩生产线关键技术研究[J]. 机电工程技术, 2020, 49(8): 141-144. doi: 10.3969/j.issn.1009-9492.2020.08.045
|
[9] |
成勇, 郑熙云. 一种新型丝网张力计校准装置[J]. 计量技术, 2017(12): 76-78.
|
[10] |
林凤钦. 口罩机结构及控制系统分析与调试[J]. 中国机械, 2020(11): 128-131.
|
[11] |
秦岗, 蒋树炎. 精密数控磨床中直线导轨和滚珠丝杆的应用研究[J]. 装备制造技术, 2021(6): 127-130. doi: 10.3969/j.issn.1672-545X.2021.06.031
|
[12] |
牟志, 沈童. 机床梯形丝杆螺母校准丝锥的设计[J]. 工具技术, 2014(3): 92-92. doi: 10.3969/j.issn.1000-7008.2014.03.042
|
[13] |
原国家质量监督检验检疫总局, 国家标准化管理委员会. 滚珠丝杠副 第5部分: 轴向额定静载荷和动载荷及使用寿命: GB/T 17587.5-2008[S]. 北京: 中国标准出版社, 2008.
|
[14] |
张锦. 导轨滑块应如何选型计算[J]. 大科技, 2020(12): 237-238.
|
[15] |
陈汀, 黄其柏. 一种计及滑块裙部变形的滚珠直线导轨副垂直刚度模型[J]. 中国机械工程, 2011, 22(13): 1546-1550.
|