Citation: | LIN Hu, HUANG Yao, YANG Guoliang, YANG Yu, GU Yuling, ZOU Wei, XUE Zi. Development of the New Generation National Primary Standard for Gear Helix Calibration[J]. Metrology Science and Technology, 2022, 66(4): 67-73. doi: 10.12338/j.issn.2096-9015.2021.0642 |
[1] |
Goch G, Knapp W, Haertig F. Precision engineering for wind energy systems[J]. CIRP Annals, 2012, 61(2): 611-634.
|
[2] |
周森, 蒋聪, 徐健, 等. 齿轮齿廓的测量方法及不确定度评定[J]. 计量技术, 2017(1): 22-25.
|
[3] |
中国机械通用零部件工业协会齿轮分会. 中国齿轮行业“十三五”发展规划纲要[EB/OL]. (2015-12-31) [2021-11-23]. http://www.cgma.net.cn/download_detail/&downloadsId=131.html.
|
[4] |
刘忠明, 王长路, 张元国, 等. 中国齿轮工业的现状、挑战与2030年愿景——《机械工业工程技术路线图》齿轮部分解读[J]. 机械传动, 2011, 35(12): 1-6. doi: 10.3969/j.issn.1004-2539.2011.12.001
|
[5] |
Frazer R C, Bicker R, Cox B, et al. An international comparison of involute gear profile and helix measurement[J]. Metrologia, 2004, 41(1): 12-16. doi: 10.1088/0026-1394/41/1/003
|
[6] |
Haertig F, Keck C, Kniel K. A novel high accuracy concept for gear calibration[J]. Gear Technology, 2005, 5-6: 16-20.
|
[7] |
Haertig F, Keck C, Kniel K, et al. Development of a novel gear measuring device of high accuracy[C]. Proceedings of the ASME Design Engineering Technical Conference. Chicago, 2003: 853-857.
|
[8] |
Härtig F, Stein M. 3D involute gear evaluation— Part I: Workpiece coordinates[J]. Measurement, 2019, 134: 569-573. doi: 10.1016/j.measurement.2018.10.088
|
[9] |
Stein M, Keller F, Przyklenk A. A Unified Theory for 3D Gear and Thread Metrology[J]. Applied Sciences, 2021, 11: 1-19.
|
[10] |
石照耀, 张斌, 费业泰. 阿贝原则再认识[J]. 仪器仪表学报, 2012, 33(5): 1128-1133. doi: 10.3969/j.issn.0254-3087.2012.05.025
|
[11] |
Goch G. Gear metrology[J]. CIRP Annals - Manufacturing Technology, 2003, 52(2): 659-695. doi: 10.1016/S0007-8506(07)60209-1
|
[12] |
石照耀, 费业泰, 谢华锟. 齿轮测量技术100年——回顾与展望[J]. 中国工程科学, 2003, 5(9): 13-17. doi: 10.3969/j.issn.1009-1742.2003.09.003
|
[13] |
薛梓, 林虎, 黄垚, 等. 两维激光光路齿轮测量装置: 2016104438086[P]. 2016-06-21.
|
[14] |
薛梓, 林虎, 黄垚, 等. 一种可直接溯源的高精度齿轮误差测量方法: 2016104438103[P]. 2016-06-21.
|
[15] |
Hou Jia, Xue Zi, Huang Yao, et al. Effect of varying load on angle measurement deviation of rotary table[C]. Proc SPIE Int Soc Opt Eng, 2019, 11053: 1-9.
|
[16] |
Huang Yao, Xue Zi, Qiao Dan, et al. Study on the metrological performance of self-calibration angle encoder[C]. Proc SPIE Int Soc Opt Eng, 2016, 9684: 1-8.
|
[17] |
林虎, 薛梓, 杨国梁. 螺旋线基准装置测头挠曲误差标定[J]. 计量学报, 2017, 38(6A): 35-38.
|